R01DS0012EJ0110_15 Datasheet, PDF (43/70 Pages) Renesas Technology Corp – RENESAS MCU

R8C/34W Group, R8C/34X Group, R8C/34Y Group, R8C/34Z Group
4. Special Function Registers (SFRs)
Table 4.17 SFR Information (17) ⁽¹⁾
Address
Register
2F3Bh CAN0 Message Control Register 11
2F3Ch CAN0 Message Control Register 12
2F3Dh CAN0 Message Control Register 13
2F3Eh CAN0 Message Control Register 14
2F3Fh CAN0 Message Control Register 15
2F40h CAN0 Control Register
2F41h
2F42h CAN0 Status Register
2F43h
2F44h CAN0 Bit Configuration Register
2F45h
2F46h
2F47h
2F48h CAN0 Receive FIFO Control Register
2F49h CAN0 Receive FIFO Pointer Control Register
2F4Ah CAN0 Transmit FIFO Control Register
2F4Bh CAN0 Transmit FIFO Pointer Control Register
2F4Ch CAN0 Error Interrupt Enable Register
2F4Dh CAN0 Error Interrupt Factor Judge Register
2F4Eh CAN0 Reception Error Count Register
2F4Fh CAN0 Transmission Error Count Register
2F50h CAN0 Error Code Store Register
2F51h CAN0 Channel Search Support Register
2F52h CAN0 Mailbox Search Status Register
2F53h CAN0 Mailbox Search Mode Register
2F54h CAN0 Time Stamp Register
2F55h
2F56h CAN0 Acceptance Filter Support Register
2F57h
2F58h CAN0 Test Control Register
:
2FFFh
X: Undefined
Note:
1. The blank areas are reserved and cannot be accessed by users.
Symbol
C0MCTL11
C0MCTL12
C0MCTL13
C0MCTL14
C0MCTL15
C0CTLR
C0STR
C0BCR
C0RFCR
C0RFPCR
C0TFCR
C0TFPCR
C0EIER
C0EIFR
C0RECR
C0TECR
C0ECSR
C0CSSR
C0MSSR
C0MSMR
C0TSR
C0AFSR
C0TCR
After reset
00h
00h
00h
00h
00h
00000101b
00h
00000101b
00h
00h
00h
00h
10000000b
XXh
10000000b
XXh
00h
00h
00h
00h
00h
XXh
10000000b
00h
00h
00h
XXh
XXh
00h
Table 4.18 ID Code Areas and Option Function Select Area
Address
:
FFDBh
:
FFDFh
:
FFE3h
:
FFEBh
:
FFEFh
:
FFF3h
:
FFF7h
:
FFFBh
:
FFFFh
Area Name
Option Function Select Register 2
ID1
ID2
ID3
ID4
ID5
ID6
ID7
Option Function Select Register
Symbol
OFS2
OFS
After Reset
(Note 1)
(Note 2)
(Note 2)
(Note 2)
(Note 2)
(Note 2)
(Note 2)
(Note 2)
(Note 1)
Notes:
1.
2.
The option function select area is allocated in the flash memory, not in the SFRs. Set appropriate values as ROM data by a program.
Do not write additions to the option function select area. If the block including the option function select area is erased, the option function select
area is set to FFh.
When blank products are shipped, the option function select area is set to FFh. It is set to the written value after written by the user.
When factory-programming products are shipped, the value of the option function select area is the value programmed by the user.
The ID code areas are allocated in the flash memory, not in the SFRs. Set appropriate values as ROM data by a program.
Do not write additions to the ID code areas. If the block including the ID code areas is erased, the ID code areas are set to FFh.
When blank products are shipped, the ID code areas are set to FFh. They are set to the written value after written by the user.
When factory-programming products are shipped, the value of the ID code areas is the value programmed by the user.
R01DS0012EJ0110 Rev.1.10
Jan 31, 2013
Page 43 of 67