R0E572167CFK10E Datasheet, PDF (35/54 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 3 Connection Procedures
3.3.2 Connecting the Common User-System Interface Adaptor Cable (Board Section)
CAUTION
Check the position of pin 1 and the connector number before
insertion.
Ensure that the positions of [CONNECTOR1], [CONNECTOR2], or [CONNECTOR3] on the
common user-system interface adaptor cable match the positions of [CONNECTOR1],
[CONNECTOR2], or [CONNECTOR3] on the user-system interface converter board, and connect
the cable to the board. When they are correctly connected, the six guide pins on the user-system
interface converter board will enter the holes on the board section of the common user-system
interface adaptor cable.
Spacer
Common user-system interface
adaptor cable (board section)
Guide pin
Common user-system interface
converter board
User system
Figure 8 Connecting the Common User-System Interface Adaptor Cable (Board Section)
Rev. 1.00 Jul. 03, 2009 Page 17 of 32
REJ10J2025-0100