R0E572167CFK10E Datasheet, PDF (29/54 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 3 Connection Procedures
Connect the flexible cable to CONNECTOR1 mounted on the board section of the common
user-system interface adaptor cable as shown below.
After that, connect the flexible cable to CONNECTOR2.
Connect the flexible cable to CONNECTOR3.
Connect the common user-system interface adaptor cable with the user-system interface
PLQP0176KB-A converter board,with each of the three flexible cable sections of the adaptor cable
connected to the corresponding connector ([CONNECTOR1], [CONNECTOR2], or [CONNECTOR3])
on the converter board.
Figure 3 Assembling the User System Interface Cable
Rev. 1.00 Jul. 03, 2009 Page 11 of 32
REJ10J2025-0100