R0E572167CFK10E Datasheet, PDF (30/54 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 3 Connection Procedures
____
When removing the flexible cable from a converter board or a board section
of the adaptor cable, keep the board in place, hold both sides of the connector
at the head of the cable, and apply vertical force to pull the cable away. If the
join is stiff so that the cable is dificult to remove, pull the cable head up from the
right or left side. Do not apply pressure in the direction marked "X", since this
will damage the connector.
Figure 4 Removing the Flexible Cable
Rev. 1.00 Jul. 03, 2009 Page 12 of 32
REJ10J2025-0100