PD78F0701Y_15 Datasheet, PDF (32/54 Pages) Renesas Technology Corp – 8-BIT SINGLE-CHIP MICROCONTROLLER

µPD78F0701Y
DC CHARACTERISTICS (TA = -40°C to +85°C, VDD = 3.5 to 5.5 V)
Parameter
Symbol
High-level output leakage ILOH
current
Low-level output leakage ILOL
current
Software pull-up resistor R1
Note 1
Power supply current
IDD1
IDD2
Conditions
VOUT = VDD
P00-P07, P20-P27, P30-P36,
P40-P47, P50-P57, P64-P67,
P70-P77, P80-P87, P90-P97,
CTXD/ITX0
VOUT = 0 V
P00-P07, P20-P27, P30-P36,
P40-P47, P50-P57, P64-P67,
P70-P77, P80-P87, P90-P97,
CTXD/ITX0
VIN = 0 V
P00-P07, P20-P27, P30-P32,
P34-P36, P40-P47, P50-P57,
P64-P67, P70, P73-P77
6.29-MHz crystal oscillation operating mode
Note 2
6.29-MHz crystal oscillation HALT mode
IDD3
STOP mode
MIN.
15
TYP.
30
4.0
500
0.1
MAX.
Unit
3
µA
-3
µA
90
kΩ
20
mA
1,000
µA
30
µA
Notes 1. The current flowing through the VDD1 pin. The power supply current does not include the current flowing
through the A/D converter and on-chip pull-up resistors.
2. During low-speed mode operation (when 04H is loaded into the processor clock control register (PCC)).
The power supply current does not include the current for peripheral circuit operation.
Remark Unless otherwise specified, the characteristics of a dual-function pin are the same as those of the
corresponding port pin.
30
Preliminary Product Information U13563EJ2V0PM00