|
32182 Datasheet, PDF (208/755 Pages) Renesas Technology Corp – 32-BIT RISC SINGLE-CHIP MICROCOMPUTER M32R FAMILY / M32R/ECU SERIES | |||
|
◁ |
8
INPUT/OUTPUT PORTS AND PIN FUNCTIONS
8.5 Port Peripheral Circuits
8.5 Port Peripheral Circuits
Figures 8.5.1 through 8.5.4 show the peripheral circuit diagrams of the input/output ports described in the preced-
ing pages.
P00âP07(DB0âDB7)
P10âP17(DB8âDB15)
P20âP27(A23âA30)
P30âP37(A15âA22)
P46, P47(A13, A14)
P71(WAIT#)
P73(HACK#)
P74(RTDTXD)
P76(RTDACK)
P224(A11/CS2#)
P225(A12/CS3#)
Data bus
Direction register
Port output latch
Input data select bit
Peripheral function input
P44(CS0#)
P45(CS1#)
P70(BCLK/WR#)
P82(TXD0)
P85(TXD1)
P93âP97(TO16âTO20)
P100(TO8)
P103âP107(TO11âTO15)
P110âP117(TO0âTO7)
P174(TXD2)
P220(CTX0)
Data bus
Operation mode register
Input function
enable
(Note 1)
Port level
switching function
(Standard:
peripheral TTL)
Direction register
Port output latch
Input data select bit
Peripheral function output
Operation mode register
Input function
enable
(Note 1)
Port level switching
function (No
peripheral input)
Note 1: For details about the port level switching function, see Section 8.4, "Port Input Level Switching Function."
Notes: ⢠During processor mode, P00-P07, P10-P17, P20-P27, P30-P37, P45-P47, P224, and P225 are external bus
interface control signal pins, but their functional description in this block diagram is omitted.
⢠Although P224 and P225 serve triple functions, their functional description in this block diagram is omitted.
⢠The circle denotes a pin.
⢠The symbol
denotes a parasitic diode. Make sure the voltage applied to each pin does not exceed the
VCCE voltage.
⢠The input capacitance of each pin is approximately 10 pF.
Figure 8.5.1 Port Peripheral Circuit Diagram (1)
8-27
32182 Group Userâs Manual (Rev.1.0)
|
▷ |