H8S39 Datasheet, PDF (1049/1512 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2600 Series

H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
Section 24 Electrical Characteristics
4. ICC depends on VCC and f as follows:
ICC (max.) = 30 (mA) + 0.54 (mA/(MHz × V)) × VCC × f (normal operation)
ICC (max.) = 30 (mA) + 0.45 (mA/(MHz × V)) × VCC × f (sleep mode)
5. The watch, subactive, and subsleep modes are available in the U-mask and W-mask
versions only.
See section 22A.7, Subclock Oscillator, for the method of fixing pins OSC1 and OSC2.
6. If the motor-control PWM timer is not used, do not leave the PMWVCC, or PMWVSS pins
open. If the motor-control PWM timer is not used, apply a voltage of between 4.5 and
5.5 V to the PWMVCC pin, for instance, by connecting it to VCC.
7. The characteristics of pins 34 and 35 apply to the W-mask version.
REJ09B0103-0800 Rev. 8.00
May 28, 2010
Page 999 of 1458