CD10.241 Datasheet, PDF (9/25 Pages) PULS GmbH – DC/DC Converter 24V/24V, 10A, 240W

CD-Series
CD10.241
DC/DC Converter 24V/24V, 10A, 240W
8. FUNCTIONAL DIAGRAM
+
-
Chassis
Ground
Fig. 8-1 Functional diagram
Input Fuse
&
Input Filter
Reverse
Polarity
Protection
&
Inrush
Limiter
Power
Converter
Output
Over-
Voltage
Protection
Output
Voltage
Regulator
Output
Filter
V_OUT
+
+
-
-
DC
ok
9. FRONT SIDE AND USER ELEMENTS
Fig. 9-1 Front side
A Input terminals
Screw terminals
+ Positive input
- Negative (return) input
Chassis ground: can be used to bond the housing to PE
Ground this terminal to minimize high-frequency emissions.
B Output terminals
Screw terminals, dual terminals per pole, both pins are equal
+ Positive output
- Negative (return) output
C Output voltage potentiometer
Open the flap to set the output voltage. Factory set: 24.1V
D DC-OK LED (green)
On when the voltage on the output terminals is > 21V
Jul. 2017 / Rev. 1.1 DS-CD10.241-EN All parameters are typical values at 24V, 10A, 24Vdc input voltage, 25°C ambient and
after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
9/25