CD10.241 Datasheet, PDF (4/25 Pages) PULS GmbH – DC/DC Converter 24V/24V, 10A, 240W

CD-Series
CD10.241
DC/DC Converter 24V/24V, 10A, 240W
3. INPUT VOLTAGE
Input voltage
Input voltage range
nom.
max.
DC 24V
18.0-35.0Vdc
36.0Vdc
Allowed voltage between input
and earth
Allowed input ripple voltage
max.
max.
60Vdc or
42.2Vac
5Vpp
Turn-on voltage
Shut-down voltage
Input current
Start-up delay
Rise time
Turn-on overshoot
Input capacitance
typ.
typ.
typ.
typ.
typ.
typ.
max.
typ.
17.5Vdc
15.5Vdc
10.5A
14,3A
200ms
200ms
200ms
250mV
4 300μF
-25%/+46%
full specified
absolute maximum continuous input voltage with no
damage to the DC/DC converter
in case the output voltage is not grounded.
47Hz-500Hz, the momentary input voltage must always
be within the specified limits.
steady-state value, see Fig. 3-1
steady-state value, see Fig. 3-1
at 24Vdc input and output 24V, 10A, see Fig. 3-3
at 18Vdc input and output 24V, 10A, see Fig. 3-3
see Fig. 3-1
0mF, 24V, constant current load 10A, see Fig. 3-2
10mF, 24V, constant current load 10A, see Fig. 3-2
see Fig. 3-2
external capacitors on the input voltage bus are allowed
without any limitations.
Fig. 3-1 Input voltage range
P_OUT
Rated input range
Fig. 3-2 Turn-on behavior, definitions
Input
Voltage
V_IN
Output
- 5%
Voltage
Start-up Rise
delay Time
Fig. 3-3 Input current vs. output load
16A
12
Input
Current,
typ.
8
InpInupt:u1t8: ^V2d4cVdc
4
Output Current
0
2 3 4 5 6 7 8 9 10 11 12A
Jul. 2017 / Rev. 1.1 DS-CD10.241-EN All parameters are typical values at 24V, 10A, 24Vdc input voltage, 25°C ambient and
after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
4/25