YR2.DIODE Datasheet, PDF (7/19 Pages) PULS GmbH – DUAL REDUNDANCY MODULE

Y-Series
YR2.DIODE
DC12-48V (120V), 20A, DUAL REDUNDANCY MODULE
6. TERMINALS AND WIRING
Type
Solid wire
Stranded wire
American Wire Gauge
Max. wire diameter
Wire stripping length
Pull-out force
Input and output
Bi-stable, quick-connect spring clamp terminals.
IP20 Finger safe construction.
Suitable for field- and factory installation.
Shipped in open position.
0.5-6mm²
0.5-4mm²
20-10 AWG
2.8mm (including ferrule)
10mm / 0.4inch
10AWG:80N, 12AWG:60N, 14AWG:50N, 16AWG:40N (according to UL486E)
Instructions:
a) Use appropriate copper cables that are designed for
minimum operating temperatures of:
60°C for ambient up to 45°C and
75°C for ambient up to 60°C and
90°C for ambient up to 70°C minimum.
b) Follow national installation codes and installation
regulations!
c) Ensure that all strands of a stranded wire enter the
terminal connection!
d) Ferrules are allowed.
e) Do not connect or disconnect the wires from the
terminals below -25°C (-13°F).
Fig. 6-1 Connecting a wire
1. Insert the wire
2. Snap the lever
To disconnect wire: same procedure vice versa
Apr. 2014 / Rev. 1.4 DS-YR2.DIODE-EN
All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
www.pulspower.com Phone [phone] Germany
7/19