PAS395 Datasheet, PDF (6/14 Pages) PULS GmbH – Charger for EDLC Capacitors (Ultra-Caps)

5
General Data
Efficiency:
typ. 94.4 %
at 400Vdc output voltage, 2.6A output current and 230Vac input
voltage.
Full-load Power Losses:
No-load Power Losses:
typ. 60.8W at 400Vdc output voltage and 2.6A output current
typ. 12 W at 360Vdc output voltage
typ. 13 W at 400Vdc output voltage
typ. 15 W at 460Vdc output voltage
6
Charging Performance
The charger is suitable to charge capacitors up to 5F. The typical capacitance is considered to
be 2F. Therefore, most of the following curves and investigations apply for this size of capacitor
unless otherwise stated.
This document is proprietary. Any dispatch or disclosure of content is authorized only after written authorization by PULS GmbH.
All parameters are specified at 400V, 2.5A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
Specification: SP-PAS395 Rev: 3.1
Date: 2013/01/19
6-14