PE9702 Datasheet, PDF (5/13 Pages) Peregrine Semiconductor Corp. – 3.0 GHz Integer-N PLL for Rad Hard Applications

PE9702
Product Specification
Table 2. Absolute Maximum Ratings
Symbol Parameter/Conditions Min Max Units
VDD
Supply voltage
VI
Voltage on any input
II
DC into any input
-0.3 4.0
V
-0.3
VDD
+ 0.3
V
-10 +10 mA
IO
DC into any output
Tstg
Storage temperature
range
-10 +10 mA
-65 150
°C
Table 3. Operating Ratings
Symbol Parameter/Conditions Min Max Units
VDD
Supply voltage
TA
Operating ambient
temperature range
2.85 3.15
V
-40 85
°C
Table 4. ESD Ratings
Symbol
Parameter/Conditions
Level Units
VESD
ESD voltage (Human Body Model)
– Note 1
1000
V
Note 1: Periodically sampled, not 100% tested. Tested per MIL-
STD-883, M3015 C2
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS™ device, observe
the same precautions that you would use with
other ESD-sensitive devices. Although this device
contains circuitry to protect it from damage due to
ESD, precautions should be taken to avoid
exceeding the specified rating in Table 4.
Latch-Up Avoidance
Unlike conventional CMOS devices, UltraCMOS™
devices are immune to latch-up.
Table 5. DC Characteristics: V_DD = 3.0 V, -40° C < T_A < 85° C, unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Operational supply current;
IDD
Prescaler disabled
Prescaler enabled
Digital Inputs: All except fr, Fin, F_in
VIH
High level input voltage
VIL
Low level input voltage
IIH
High level input current
IIL
Low level input current
Reference Divider input: fr
IIHR
High level input current
IILR
Low level input current
R0 Input: R0
IIHR
High level input current
IILR
Low level input current
Counter and phase detector outputs: fc, fp.
VOLD
Output voltage LOW
VOHD
Output voltage HIGH
Lock detect outputs: Cext, LD
VOLC
Output voltage LOW, Cext
VOHC
VOLLD
Output voltage HIGH, Cext
Output voltage LOW, LD
VDD = 2.85 to 3.15 V
VDD = 2.85 to 3.15 V
VDD = 2.85 to 3.15 V
VIH = VDD = 3.15 V
VIL = 0, VDD = 3.15 V
VIH = VDD = 3.15 V
VIL = 0, VDD = 3.15 V
VIH = VDD = 3.15 V
VIL = 0, VDD = 3.15 V
Iout = 6 mA
Iout = -3 mA
Iout = 100 µA
Iout = -100 µA
Iout = 6 mA
10
24
0.7 x VDD
-1
-100
-5
VDD - 0.4
VDD - 0.4
Max
31
Units
mA
mA
V
0.3 x VDD
V
+70
µA
µA
+100
µA
µA
+70
µA
µA
0.4
V
V
0.4
V
V
0.4
V
Document No. 70-0036-02 │ www.psemi.com
©2003-2006 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 13