PE9702 Datasheet, PDF (1/13 Pages) Peregrine Semiconductor Corp. – 3.0 GHz Integer-N PLL for Rad Hard Applications

Product Description
Peregrine’s PE9702 is a high-performance integer-N PLL
capable of frequency synthesis up to 3000 MHz. The
device is designed for superior phase noise performance
while providing an order of magnitude reduction in current
consumption, when compared with existing commercial
space PLLs.
The PE9702 features a 10/11 dual modulus prescaler,
counters and a phase comparator as shown in Figure 1.
Counter values are programmable through either a serial or
parallel interface and can also be directly hard wired.
The PE9702 is optimized for commercial space
applications. Single Event Latch up (SEL) is physically
impossible and Single Event Upset (SEU) is better than
10^-9 errors per bit / day. It is manufactured on Peregrine’s
UltraCMOS™ process, a patented variation of silicon-on-
insulator (SOI) technology on a sapphire substrate, offering
excellent RF performance and intrinsic radiation tolerance.
Figure 1. Block Diagram
Product Specification
PE9702
3000 MHz UltraCMOS™ Integer-N PLL
Rad Hard for Space Applications
Features
• 3000 MHz operation
• ÷10/11 dual modulus prescaler
• Internal phase detector
• Serial, parallel or hardwired
programmable
• Ultra-low phase noise
• SEU < 10^-9 errors / bit-day
• 100 Krad (Si) total dose
• 44-lead CQFJ
F_in
Prescaler
F_in
10 / 11
D(7:0)
8
Sdata
Primary
20-bit
Latch ²⁰
Secon-
dary
20
20-bit
20
Pre_en
Latch ²⁰
16
M(6:0)
A(3:0)
R(3:0)
f_r
Main
Counter
13
66
R Counter
f_p
Phase
Detector
PD_U
PD_D
f_c
Document No. 70-0036-02 │ www.psemi.com
©2003-2006 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 13