10000200 Datasheet, PDF (90/164 Pages) List of Unclassifed Manufacturers – Let Rose+Bopla be your partner for standard or customized enclosures.

Pilot 250
• Polyamide hand held enclosure for automation engineering and data acquisition
• Large component space
• Version 3 with closed or front frame
• Rear battery compartment
Included in delivery
Enclosure with top and base unit, each with mounting
bosses, battery compartment cover, fastening and
enclosure screws.
Technical Data
Color
Material
Ingress Protection
Gasket
Impact Resistance
Temperature Range
Base and lid: black gray, similar to RAL 7021
Rear cover: sapphire blue, similar to RAL 5003
Polyamide
IP 65 to EN 60529
Continuous foamed-in Neoprene
>7 Nm, EN 50014
-40°F to +140 ° F
Enclosure
Type
Part
Number
Dimensions
mm
WxLxH
Dimensions
Inches
WxLxH
Version
Upper liner
Pilot 250/1 29250001 00 140/120 x 280 x 86
Pilot 250/2 29250002 00 140/120 x 280 x 86
5.51/4.72 x 11.02 x 3.38
5.51/4.72 x 11.02 x 3.38
Closed
as frame for front panel mounting
Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only.
Accessories
Description
Front panel, aluminum for Pilot 250/2
Magnet holder, round
Battery holder for mounting 4 rounds cells in the enclosure base
Battery holder for mounting a 9V battery in the enclosure base
Mounting set (2 hooks, 2 bolts with screws)
Cable gland with bending protection M 16 x 1.5
Cable gland with bending protection M 20 x 1.5
Enable button (3-stage)
Part Number
29250101 00
29250102 00
29250103 00
29250104 00
29250105 00
08100116 00
08100120 00
on request
88
www.Rose-Bopla.com