10000200 Datasheet, PDF (139/164 Pages) List of Unclassifed Manufacturers – Let Rose+Bopla be your partner for standard or customized enclosures.

Specifications
Fiberglass
COMPRESSION
MOLDED
FIBERGLASS
• Fiberglass Watertight Enclosures
• Fiberglass Compression Molded Enclosures
• Fiberglass Mobile Control Enclosures
Made of glass fiber (25mm long) reinforced polyester plastic. Heat pressed compression molded under heat and pressure.
This guarantees excellent dimensional stability under heat, excellent mechanical strength and dynamic load capacity, very low
friction, excellent abrasion resistance to chemicals and weather, excellent surface finish, excellent dimensional stability and little
tendency to stress and cracking.
Reinforced glass fiber fiberglass (polyester) mats come in rolls. The rolls are cut in the correct size, weighed and then placed
into a heated mold. Under high pressure the material liquifies, and fills the mold completely. After a few minutes under heat
and pressure, the completed housing can be removed for trimming and assembly.
In general, the resistance of this material to acids, bleaches and organic solvents ranges from good to excellent.
Physical Properties
Approx Value
Leakage Current
KA 3c
Surface Resistance
1.0 x 1013
Absorption of Water
.6
Combustibility
self-extinguishing
Flame Resistance
self-extinguishing
Insulation
fully insulated
Continuous Heat
-40° C +250° C
Thermal Conductivity:
.6
NOTE: VALUES SHOWN ARE APPROXIMATE.
Mechanical Properties
Approx Value
Density
1.50
Resistance to Pressure
150
Elongation
1
Modulus of Elasticity
7100
Bending Strength
180
Compression Strength
120-150
Impact Resistance
21-25
Shear Resistance
180
NOTE: VALUES SHOWN ARE APPROXIMATE.
Unit of Measurement
Test Standard
Class
DIN 53480
Ohm
DIN 53482
%
DIN 53472
ASTD D-635 UL 94 VO
Almost Non-Flammable
VDE 0100-7
DIN 53458
W/mk (watts per meter x coefficient of thermal expansion)
Unit of Measurement
g/cm³
N/mm²
%
N/mm²
N/mm²
N/mm²
KJ/m²
N/mm²
Test Standard
DIN 53479
DIN 53453
DIN 53455
DIN 53457
DIN 53452
DIN 53454
DIN 53453
DIN 53452
For Secondary Services, Product Support, or To Order, Call 1-301-696-9800
137