|
10000200 Datasheet, PDF (147/164 Pages) List of Unclassifed Manufacturers – Let Rose+Bopla be your partner for standard or customized enclosures. | |||
|
◁ |
Specifications
Military
THE FOLLOWING STANDARDS WILL BE APPLIED ONLY WHEN SPECIFIED.
FEDERAL SUPPLY
CODES
Rose Federal Supply Code
Rose Foreign Country Supply Code
Cage Code
#FSCM-4Y520
#FSCM-C024
1L9R7
QUALITY
PROCEDURES
ISO 9001:2000
CALIBRATION
SYSTEM
REQUIREMENTS
ISO 9001:2000
ASSEMBLY &
PACKAGING
Mil Spec
#STD-130
Special request only.
ALUMINUM
Mil Spec
ASTM
For Europe:
ASTM-B85
#B-8560: S 12A
DIN 230 Alloy
STAINLESS STEEL
LID SCREWS
MACHINED
SURFACES
Hardness Cross: 70
Torque: M4 = 18-26 inch lbs. M6 = 26-35 inch lbs.
+ Torque specs are included for reference only. Rose Bopla does not recommend using a torque wrench on enclosures
(tighten until snug).
+ When specified, Rose Bopla can:
(A) Machine Surfaces to 125 micro inches or better
(B) Deburr / Break All Sharp Edges
(C) Remove All Burrs
Helicoils
Mil Spec
#NASM-21209 Helicoil Insert Method
Masking Surfaces Prior To Painting
Rose+Bopla will mask all threaded surfaces and connector mating surfaces prior to primer
and paint application.
Chemical Surface Treatments
Gold Irridite:
Mil Spec
Clear Irridite:
Mil Spec
#C-5541-Class 1A
#C-5541-Class 3
NOTE: Gold irriditing to Mil Spec C-5541-Class 1A offers superior protection, but creates a less conductive surface for
grounding or shielding. Clear irriditing to Mil Spec C-5541-Class 3 offers less protection from corrosion, but leaves a
conductive surface which is recommended for optimum EMI shielding. All machined surfaces are irridited after machining.
Anodizing
Mil Spec
Federal Standard
# A 8625: Black Anodize Class 2 Type 2, Nickel acetate sealcoat test.
#595A: Color 37038
NOTE: All machined surfaces can be anodized after machining.
For Secondary Services, Product Support, or To Order, Call 1-301-696-9800
145
|
▷ |