 English |
|
|
|
|
|
|
|
| BUK116-50L Datasheet, PDF (6/13 Pages) NXP Semiconductors – Logic level TOPFET SMD version of BUK106-50L/S | |||
| |||
| ◁ |
Philips Semiconductors
Logic level TOPFET
SMD version of BUK106-50L/S
Product specification
BUK116-50L/S
FLAG DESCRIPTION
The flag pin provides a means to
detect the presence of the
protection supply and indicate the
state of the overload detectors.
The flag is the open drain of an
n-MOS transistor and requires an
external pull-up resistor1. It is
suitable for both 5 V and 10 V logic.
Flag may be used to implement an
external protection strategy2 for
applications which require low input
drive impedance.
TRUTH TABLE
CONDITION
DESCRIPTION
NORMAL
Normal operation and adequate
protection supply voltage
OVER TEMP.
Over temperature detected
SHORT CIRCUIT Overload condition detected
SUPPLY FAULT
Inadequate protection supply
voltage
FLAG
LOGIC LOW
LOGIC HIGH
LOGIC HIGH
LOGIC HIGH
FLAG CHARACTERISTICS
Tmb = 25 ËC unless otherwise stated
SYMBOL PARAMETER
Flag âlowâ
VFS
Flag voltage
IFSS
Flag saturation current
Flag âhighâ
IFS
Flag leakage current
VPSF
Protection supply threshold
voltage
V(CL)FS
RF
Flag clamping voltage
Application information
Suitable external pull-up
resistance
CONDITIONS
normal operation
IF = 1.6 mA
VFS = 10 V
overload or fault
VFS = 10 V
VFF = 5 V; RF = 3 kâ¦;
BUK116-50L
BUK116-50S
IF = 1 mA; VPS = 0 V
MIN. TYP. MAX. UNIT
- 0.15 0.4 V
-
15
-
mA
-
-
10 µA
2.5 3.3 4
V
3.3 4.2 5
V
11 13
-
V
VFF =5 V
VFF =10 V
1
10 50 kâ¦
2
20 100 kâ¦
1 Even if the flag pin is not used, it is recommended that it is connected to the protection supply via a pull-up resistor. It should not be left
floating.
2 Low pass filtering of the flag signal may be advisable to prevent false tripping.
July 1996
6
Rev 1.000
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese