TDA8920C_15 Datasheet, PDF (37/39 Pages) NXP Semiconductors – 2 X 110 W class-D power amplifier

NXP Semiconductors
TDA8920C
2 × 110 W class-D power amplifier
16.4 Package related soldering information
Table 14. Suitability of through-hole mount IC packages for dipping and wave soldering
Package
Soldering method
Dipping
Wave
CPGA, HCPGA
-
suitable
DBS, DIP, HDIP, RDBS, SDIP, SIL
suitable
suitable^[1]
PMFP^[2]
-
not suitable
[1] For SDIP packages, the longitudinal axis must be parallel to the transport direction of the printed-circuit
board.
[2] For PMFP packages hot bar soldering or manual soldering is suitable.
17. Revision history
Table 15. Revision history
Document ID
Release date Data sheet status
TDA8920C_2
Modifications
20090611
Product data sheet
• Parameter values revised throughout.
• Revised Figure 4 and Figure 10.
• Graphs updated (Figure 11 to Figure 27)
• Some minor additions/corrections to text
TDA8920C_1
20080929
Preliminary data sheet
Change notice
-
Supersedes
TDA8920C_1
-
TDA8920C_2
Product data sheet
Rev. 02 — 11 June 2009
© NXP B.V. 2009. All rights reserved.
37 of 39