74HC7046A Datasheet, PDF (27/38 Pages) NXP Semiconductors – Phase-locked-loop with lock detector

Philips Semiconductors
Phase-locked-loop with lock detector
Product specification
74HC/HCT7046A
APPLICATION INFORMATION
This information is a guide for the approximation of values of external components to be used with the 74HC/HCT7046
in a phase-lock-loop system.
References should be made to Figs 27, 28 and 29 as indicated in the table.
Values of the selected components should be within the following ranges:
R1
R2
R1 + R2
C1
between 3 kΩ and 300 kΩ;
between 3 kΩ and 300 kΩ;
parallel value > 2.7 kΩ;
greater than 40 pF.
SUBJECT
PHASE
COMPARATOR
VCO frequency
without extra
offset
PC1, PC2
DESIGN CONSIDERATIONS
VCO frequency characteristic
With R2 = ∞ and R1 within the range 3 kΩ < R1 < 300 kΩ, the characteristics
of the VCO operation will be as shown in Fig. 23.
(Due to R1, C1 time constant a small offset remains when R2 = ∞.)
Fig. 23 Frequency characteristic of VCO operating without offset:
f_o = centre frequency; 2f_L = frequency lock range.
Selection of R1 and C1
PC1
Given f_o, determine the values of R1 and C1 using Fig.27.
PC2
Given f_max and f_o, determine the values of R1 and C1 using Fig.27,
use Fig.29 to obtain 2f_L and then use this to calculate f_min.
December 1990
27