 English |
|
|
|
|
|
|
|
| PE9601 Datasheet, PDF (6/14 Pages) Peregrine Semiconductor Corp. – 2200 MHz UltraCMOS™ Integer-N PLL for Rad Hard Applications | |||
| |||
| ◁ |
PE9601
Product Specification
Table 5. DC Characteristics
VDD = 3.0 V, -40° C < TA < 85° C, unless otherwise specified
Symbol
Parameter
Test Program Name
Conditions
IDD
Operational supply current;
Prescaler enabled 2 GHz
center frequency with 10
MHz reference input.
Digital Inputs: All except fr, R0, Fin, Fin
VIH
High level input voltage
VIL
Low level input voltage
IIH
High level input current
(Pull-down resistor on
input)
IIL
Low level input current
Reference Divider input: fr
IIHR
High level input current
IILR
Low level input current
R0 Input (Pull-up Resistor): R0
IIHR
High level input current
(Pull-down resistor on
input)
IILR
Low level input current
Counter and phase detector outputs: fc, fp.
VOLD
Output voltage LOW
VOHD
Output voltage HIGH
Lock detect outputs: Cext, LD
IDD_T_oper_at_2 GHz
VDD = 2.85 to 3.15 V
LEVELS_âxxxâ_VIH(V)
where âxxxâ is name of pin
being tested
LEVELS_âxxxâ_VIL(V)
where âxxxâ is name of pin
being tested
IIH_âxxxâ_(A) where âxxxâ
is name of pin being
tested
IIL_âxxxâ_(A) where âxxxâ
is name of pin being
tested
VDD = 2.85 to 3.15 V
VDD = 2.85 to 3.15 V
VIH = VDD = 3.15 V
VIL = 0, VDD = 3.15 V
IIH_FR_(A)
IIL_FR_(A)
VIH = VDD = 3.15 V
VIL = 0, VDD = 3.15 V
IIH_R0_(A)
VIH = VDD = 3.15 V
IIL_R0_(A)
VIL = 0, VDD = 3.15 V
LEVELS_âxxxâ_VOL(V)
where âxxxâ is name of pin
being tested
LEVELS_âxxxâ_VOH(V)
where âxxxâ is name of pin
being tested
Iout = 6 mA
Iout = -3 mA
VOLC
Output voltage LOW, Cext
VOHC
Output voltage HIGH, Cext
VOLLD
Output voltage LOW, LD
Charge Pump output: CP
LEVELS_CEXT_VOL(V)
LEVELS_CEXT_VOH(V)
LEVELS_ LD_VOL(V)
Iout = 0.1 mA
Iout = -0.1 mA
Iout = 6 mA
ICP - Source
ICP â Sink
ICPL
Drive current
Drive current
Leakage current
ICP â Source
vs. ICP Sink
ICP vs. VCP
Sink vs. source mismatch
Output current magnitude
variation vs. voltage
CP_src_at_0.5 VDD (A)
CP_snk_at_0.5 VDD (A)
CP_lkg_PD_DX (A)
CP_srcvsnk_at_0.5 VDD
CP_snk_var,
CP_src_var
VCP = VDD / 2
VCP = VDD / 2
1.0 V < VCP < VDD â
1.0 V
VCP = VDD / 2,
TA = 25° C
1.0V < VCP < VDD â
1.0 V TA = 25° C
Min
0.7 x VDD
-1
-50
-3
VDD - 0.4
VDD - 0.4
-2.6
1.4
-1
Typ
24
-2
2
Max
Units
mA
V
0.3 x VDD
V
+100
µA
µA
+50
µA
µA
+100
µA
µA
0.4
V
V
0.4
V
V
0.4
V
-1.4
mA
2.6
mA
1
µA
25
%
25
%
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 6 of 14
Document No. 70-0025-05 â UltraCMOS⢠RFIC Solutions
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese