PE3339 Datasheet, PDF (3/12 Pages) Peregrine Semiconductor Corp. – 3.0 GHz Integer-N PLL for Low Phase Noise Applications

PE3339
Advance Information
Pin No. Pin Name Type
Description
17
CP
18
NC
Output
Output
Charge pump current is sourced when f_c leads f_p and sinked when f_c lags f_p.
No connection.
19
GND
Ground.
20
f_r
Input
Reference frequency input.
Note 1: V_DD pins 1, 9, and 16 are connected by diodes and must be supplied with the same positive voltage level.
Table 2. Absolute Maximum Ratings
Symbol
V_DD
V_I
I_I
I_O
T_stg
Parameter/Conditions Min Max Units
Supply voltage
Voltage on any input
DC into any input
DC into any output
Storage temperature
range
-0.3 4.0
V
-0.3 V_DD
V
+ 0.3
-10 +10 mA
-10 +10 mA
-65 150 °C
Table 3. Operating Ratings
Symbol
V_DD
T_A
Parameter/Conditions Min Max Units
Supply voltage
Operating ambient
temperature range
2.85 3.15
V
-40 85
°C
Table 4. ESD Ratings
Symbol
V_ESD
Parameter/Conditions
ESD voltage human body
model (Note 1)
Level Units
1000
V
Note 1: Periodically sampled, not 100% tested. Tested per MIL-
STD-883, M3015 C2
Electrostatic Discharge (ESD) Precautions
When handling this UTSi device, observe the same
precautions that you would use with other ESD-
sensitive devices. Although this device contains
circuitry to protect it from damage due to ESD,
precautions should be taken to avoid exceeding the
rating specified in Table 4.
Latch-Up Avoidance
Unlike conventional CMOS devices, UTSi CMOS
devices are immune to latch-up.
PEREGRINE SEMICONDUCTOR CORP. ® | http://www.psemi.com
Copyright © Peregrine Semiconductor Corp. 2004
Page 3 of 12