MN101EF93G Datasheet, PDF (6/30 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101EF93G
8-bit Single-chip Microcontroller
PubNo. 21693-013E
arbitrary sizes of 2 to 8 bits are selectable.
- Sequence transmission, reception or both are available.
Full duplex UART
- Baud rate timer, selected from Timer 0 to 3 or Timer A
- Parity check, overrun error/ framing error detection
- Transfer size 7 to 8 bits can be selected
Serial 4: Multi master IIC/ Clock synchronous
Clock synchronous serial interface
- Transfer clock source fpll-div/2, fpll-div/4, fpll-div/16, fpll-div/32, fs/2, fs/4,
Timer 0 to 3 or Timer A divided by 1, 2, 4, 8, 16, External clock
- MSB/LSB can be selected as the first bit to be transferred,
arbitrary sizes of 2 to 8 bits are selectable.
- Sequence transmission, reception or both are available.
Multi master IIC
- 7-bit slave address is settable.
- General call communication mode is supported.
- Automatic Reset:
Power detection level: 4.3 V (at rising), 4.2 V (at falling)
- LED Driver: 8 pins (Port A)
- Ports
I/O ports
Serial Interface pins
Timer I/O
Buzzer output pins
A/D input pins
External Interrupt pins
LED (large current) driver
High-speed oscillation
Low-speed oscillation
72 pins
21 pins
11 pins
2 pins
12 pins
5 pins
8 pins
2 pins
2 pins
Special pins
Operation mode input pins
Reset input pin
Analog reference voltage input pin
Power pins
8 pins
3 pins
1 pin
1 pin
3 pins
Publication date: February 2015