MN101EF93G Datasheet, PDF (2/30 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101EF93G
8-bit Single-chip Microcontroller
PubNo. 21693-013E
1.2 Hardware Functions
 Feature
- Memory Capacity:
ROM 128 KB
RAM 6 KB
- Package:
80-Pin LQFP (14 mm  14 mm / 0.65 mm pitch, halogen free)
Panasonic "halogen free" semiconductor products refer to the products made of molding resin and
interposer which conform to the following standards.
- Bromine : 900 ppm (Maximum Concentration Value)
- Chlorine : 900 ppm (Maximum Concentration Value)
- Bromine + Chlorine : 1500 ppm (Maximum Concentration Value)
The above-mentioned standards are based on the numerical value described in IEC61249-2-21.
Antimony and its compounds are not added intentionally.
- Machine Cycle:
High-speed mode 0.05 s / 20 MHz (4.0 V to 5.5 V)
Low-speed mode 62.5 s / 32 kHz (4.0 V to 5.5 V)
- Oscillation circuit: 3 channel oscillation circuit
Internal oscillation (frc): 16 MHz
Crystal/ceramic (fosc): Maximum 10 MHz
Crystal/ceramic (fx): Maximum 32.768 kHz
-Clock Multiplication circuit (PLL Circuit)
PLL circuit output clock (fpll): fosc multiplied by 2, 3, 4, 5, 6, 8, 10,
1/2  frc multiplication by 4, 5 enable
-Clock Gear for System Clock
System Clock (fs): fpll divided by 1, 2, 4, 16, 32, 64, 128
-Clock Gear for control clock of peripheral function
Control clock of peripheral function (fpll-div): stop or fpll divided by 1, 2, 4, 8, 16
- Memory Bank:
Expands data memory space by the bank system (by 64 KB, 16 banks)
Source address bank / Destination address bank
- Operation Mode:
NORMAL mode (High-speed mode)
SLOW mode (Low-speed mode)
HALT mode
STOP mode
(The operation clock can be switched in each mode.)
Publication date: February 2015