MN101LR05D Datasheet, PDF (5/34 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101LR05D/04D/03D/02D
8-bit Single-chip Microcontroller
PubNo. 21705-019E
* MN101LR03D
Serial Interface 3: Clock synchronous serial can be used in 2-wire communication only,
and is not compatible with SPI. (Chip select pin is not assigned.)
* MN101LR02D
Serial Interface 1: Not implemented
Serial Interface 3: Clock synchronous serial can be used in 2 or 3-wire communication,
and is not compatible with SPI. (Chip select pin is not assigned.)
• A/D Converter (ADC): 1 unit
- Resolution: 12 bits
- Analog signal input channel
MN101LR05D: 8 channels
MN101LR04D: 6 channels
MN101LR03D: 4 channels
MN101LR02D: 3 channels
• I/O ports
MN101LR05D: 69 pins (selectable N-channel transistor drive strength: 55 pins)
MN101LR04D: 53 pins (selectable N-channel transistor drive strength: 41 pins)
MN101LR03D: 37 pins (selectable N-channel transistor drive strength: 27 pins)
MN101LR02D: 22 pins (selectable N-channel transistor drive strength: 19 pins)
• Clock Output
- HCLK, SCLK, SYSCLK or RTCCLK can be output.
• Automatic Reset Circuit
• Low-voltage Detection Circuit (LVI)
• LCD Driver
<MN101LR05D>
43 segment outputs, 4 common outputs (39 segment outputs, 8 common outputs)
Display mode: Static, 1/2 to 1/8 duty
Bias: 1/2, 1/3 (Built-in boost/ External resistor divider)
<MN101LR04D>
31 segment outputs, 4 common outputs
Display mode: Static, 1/2 to 1/4 duty
<MN101LR03D>
21 segment outputs, 4 common outputs
Display mode: Static, 1/2 to 1/4 duty
* MN101LR02D does not have LCD driver function.
Publication date: October 2014