MN101LR05D Datasheet, PDF (20/34 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

1.5.2 Operating Condition
MN101LR05D/04D/03D/02D
8-bit Single-chip Microcontroller
PubNo. 21705-019E
B. Operating Condition
V_SS = 0 V
Ta = -40 C to +85 C
Parameter
Symbol
Condition
Limits
MIN TYP MAX
Supply voltage *6
B1
V_DD1 f_SYSCLK  10.0 MHz
1.8
--
3.6
B2 Supply voltage
V_DD2 f_SYSCLK 1.0 MHz *7
1.3
--
3.6
B3
V_DD3 f_SYSCLK  40 kHz *8 *10
1.1
--
3.6
B4
RAM retention
supply voltage
V_DD4 At STOP mode *10
1.1
--
3.6
Operating speed *9
B5
t_c1
V_DD30 = 1.8 V to 3.6 V
Instruction execution time
B6 _1/fSYSCLK
t_c2
V_DD30 = 1.3 V to 3.6 V
B7
t_c3
V_DD30 = 1.1 V to 3.6 V *10
0.1
--
--
1.0
--
--
25.0 --
--
*6 f_SYSCLK: Frequency for the system clock
*7 When f_SYSCLK is generated by using the internal high-speed oscillation.
*8 When f_SYSCLK is generated by using the external low-speed oscillation or the internal low-speed oscillation.
*9 tc1,2: When f_SYSCLK is generated by using the internal high-speed oscillation or the external high-speed oscillation.
(However, for tc2, only by using the internal high-speed oscillation)
tc3: When f_SYSCLK is generated by using the internal low-speed oscillation.
*10 When using auto reset function, the lowest voltage is the auto reset detection voltage.
Unit
V
s
V_DD30 = V_RSTL to 3.6 V, V_SS = 0 V
V_RSTL = 1.1 V at auto reset function
Ta = -40 C to +85C
Parameter
Symbol
Condition
External high-speed oscillation Figure:1.5.1 (MN101LR02D is not applicable.)
B8 Frequency
F_HOSCCLK V_DD30 = 1.8 V to 3.6 V
External low-speed oscillation Figure:1.5.2
B9 Frequency
F_SOSCCLK V_DD30 = V_RSTL to 3.6 V
Internal high-speed RC oscillation *11
B10
F_HRCCLK10
V_DD30 = 1.8 V to 3.6 V
FCNT = "00"
B11 Frequency
F_HRCCLK8
V_DD30 = 1.8 V to 3.6 V
FCNT = "01"
B12
F_HRCCLK1
V_DD30 = 1.3 V to 3.6 V
FCNT = "10"
Limits
Unit
MIN TYP MAX
1.0
-- 10.0 MHz
-- 32.768 -- kHz
--
10
-- MHz
--
8
-- MHz
--
1
-- MHz
Publication date: October 2014