English
Language : 

LC88FC2D0B Datasheet, PDF (6/47 Pages) ON Semiconductor – 16-bit Microcontroller 256K-byte Flash ROM / 24Kbyte RAM / 100-pin
LC88FC2D0B
● HOLDX mode: Suspends instruction execution and the operation of the peripheral circuits except those
which run on OSC0.
<1> OSC1 and RC oscillations automatically stop.
<2> OSC0 maintains the state that is established when the HOLDX mode is entered.
<3> There are nine ways of releasing the HOLDX mode.
(1) Setting the reset pin to the low level
(2) Setting at least one of the INT0, INT1, INT2, INT4, INT5, INT6,and INT7 pins to the specified
level
(3) Having an interrupt source established at port 0
(4) Having an interrupt source established at port 5
(5) Having an interrupt source established at the base timer circuit
(6) Having an interrupt established at SIO0, SIO1 or SIO4
(7) Having an interrupt established at UART2 or UATR3
(8) Having an interrupt established at Infared remote control receiver.
(9) Having an interrupt source established at the real time clock circuit
 On-chip debugger function
● Supports software debugging with the IC mounted on the target board.
● Supports source line debugging and tracing functions, and breakpoint setting and real time display.
● Single-wire communication
 Package form
● TQFP100, 14  14 : Pb-Free and Halogen Free type
 Development tools
● On-chip debugger: EOCUIF1 or EOCUIF2 + LC88FC2D0B
 Programming board
Package
TQFP100,14  14
Programming Board
W88F52TQ
 Flash ROM Programmer
Maker
Model
Flash Support
Group
Company
(FSG)
+
ON
Semiconductor
( Note 1 )
ON
Semiconductor
On-board
Single /
Gang
programmer
Single /
Gang
programmer
AF9101/AF9103(Main budy)
( FSG models )
SIB88 Type A
(Interface driver )
(ON Semiconductor model)
SKK Type C
(SanyoFWS)
On-board
Single
programmer
FWS-X16DI Type 2
For information about AF-Series:
Flash Support Group Company. (TOA ELECTRONICS, Inc.)
TEL: +81-53-459-1050
E-mail: sales@j-fsg.co.jp
Supported
Version
( Note 2)
Application Version
After 1.08
Chip Data Version
After 2.46
Application Version
After 1.08
Chip Data Version
After 2.45
Device
LC88FC2H0
LC88FC2H0
LC88FC2H0
Note1: On-board-programmer from FSG (AF9101/AF9103) and serial interface driver from our company
(SIB88-TypeA) together can give a PC-less, standalone on-board-programming capabilities.
Note2: It needs a special programming devices and applications depending on the use of programming
environment. Please ask FSG or our company for the information.
www.onsemi.com
6