LC88FC2D0B Datasheet, PDF (19/47 Pages) ON Semiconductor – 16-bit Microcontroller 256K-byte Flash ROM / 24Kbyte RAM / 100-pin

LC88FC2D0B
■ Electrical Characteristics at Ta=–40 to +85C, VSS1=VSS2=VSS3=VSS4=0V
Parameter
High level input
current
Low level input
current
Symbol
Applicable Pin
/Remarks
Conditions
VDD [V]
min
IIH (1)
Ports 0, 1, 2
Ports 3, 4, 5
Ports 6, 7
Ports A, B,C, D
RESB
Output disabled
Pull-up resistor off
VIN=VDD
(including output Tr. off
leakage current)
2.7 to 3.6
IIL (1) Ports 0, 1, 2
Output disabled
Ports 3, 4, 5
Pull-up resistor off
Ports 6, 7
VIN=VSS
2.7 to 3.6
1
Ports A, B, C, D
(including output Tr. off
RESB
leakage current)
Specification
typ
max unit
1
A
High level output
voltage
VOH (1) Ports 0, 1, 2, 3
Ports 5, 6
VOH (2) Ports A, D, PC2
P40 to P45
PB2 to PB6
IOH=0.4mA
IOH=0.2mA
3.0 to 3.6 ^VDD0.4
2.7 to 3.6 ^VDD0.4
VOH (3) P46, P47
VOH (4) ^{PB0, PB1}
IOH=1.6mA
IOH=1.0mA
3.0 to 3.6 ^VDD0.4
2.7 to 3.6 ^VDD0.4
VOH (5) PC0, PC1,
VOH (6) ^{PC3, PC4,}
IOH=1.0mA
IOH=0.4mA
3.0 to 3.6 ^VDD0.4
2.7 to 3.6 ^VDD0.4
Low level output VOL (1) Ports 0, 1, 3 , 4
IOL=1.6mA
V
voltage
Ports 5, 6, 7, D
PC2
3.0 to 3.6
0.4
P20 to P21,
VOL (2) _{P24 to P27}
IOL=1.0mA
PA0 to PA3
PA6 to PA7
2.7 to 3.6
0.4
PB0 to PB3, PB6
VOL (3) P22, P23,
IOL=3.0mA
3.0 to 3.6
0.4
VOL (4) ^{PA4, PA5,}
PB4, PB5
IOL=1.3mA
2.7 to 3.6
0.4
VOL (5) PC0, PC1,
IOL=1.0mA
3.0 to 3.6
0.4
VOL (6) ^{PC3, PC4,}
IOL=0.4mA
2.7 to 3.6
0.4
Pull-up resistor
Rpu (1)
Rpu (2)
Ports 0, 1, 2, 3
Ports 4, 5, 6, 7
Ports A, B, D, PC2
VOH=0.9VDD
3.0 to 3.6
15
2.7 to 3.6
15
35
80
k
35
100
Hysteresis voltage VHYS RESB
When ports 1, 2, 3,
4, A, B
2.7 to 3.6
0.1VDD
V
PnFSAn=1
Pin capacitance
CP
All pins
Pins other than that under
test
VIN=VSS
f=1 MHz
2.7 to 3.6
10
pF
Ta=25C
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be
indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
19