LC88FC2D0B Datasheet, PDF (3/47 Pages) ON Semiconductor – 16-bit Microcontroller 256K-byte Flash ROM / 24Kbyte RAM / 100-pin

LC88FC2D0B
 Real time clock
<1> Calender with Jan. 1, 2000 to Dec.31, 2799 including automatic leapyear calculation function.
<2> Consisted of Indipendent second-minuit-hour-day-month-yeare-century counters.
 Serial interfaces
● _{SIO0: 8-bit synchronous SIO}
<1> LSB first/MSB first mode selectable
<2> Supports data communication with a data length of 8 bits or less (1 to 8 bits specifiable)
<3> Built-in 8-bit baudrate generator (4 tCYC to 512 tCYC transfer clocks)
<4> Continuous/automatic data transmission (9- to 32768-bit units specifiable)
<5> Interval function (intervals specifiable in 0 to 64tSCK units)
<6> Wakeup function
● _{SIO1: 8-bit synchronous SIO}
<1> LSB first/MSB first mode selectable
<2> Supports data communication with a data length of 8 bits or less (1 to 8 bits specifiable)
<3> Built-in 8-bit baudrate generator (4 tCYC to 512 tCYC transfer clocks)
<4> Continuous/automatic data transmission (9- to 32768-bit units specifiable)
<5> Interval function (intervals specifiable in 0 to 64tSCK units)
<6> Wakeup function
● _{SIO4: 8-bit synchronous SIO}
<1> LSB first/MSB first mode selectable
<2> Supports data communication with a data length of 8 bits or less (1 to 8 bits specifiable)
<3> Built-in 8-bit baudrate generator (4 tCYC to 512 tCYC transfer clocks)
<4> Continuous/automatic data transmission (9- to 32768-bit units specifiable)
<5> Interval function (intervals specifiable in 0 to 64tSCK units)
<6> Wakeup function
● _{SMIIC0: Single master I}²_{C/8-bit synchronous SIO}
Mode 0: Single-master mode communication
Mode 1: Synchronous 8-bit serial I/O (MSB first)
● _{SMIIC1: Single master I}²_{C/8-bit synchronous SIO}
Mode 0: Single-master mode communication
Mode 1: Synchronous 8-bit serial I/O (MSB first)
● _{SLIIC0: Slave I}²_{C/8-bit synchronous SIO}
Mode 0: I²C slave mode communication
Mode 1: Synchronous 8-bit serial I/O (MSB first)
Note: usable only with the external clock source
● _UART0
<1> Data length : 8 bits (LSB first)
<2> Start bits : 1 bit
<3> Stop bits : 1 bit
<4> Parity bits : None/even parity/odd parity
<5> Transfer rate : 4/8 cycle
<6> Baudrate source clock: P07 input signal used as a 1 cycle signal (T0PWMH can be used as a clock
source) or Timer4 cycle.
<7> Full duplex communication
Note: The “cycle” refers to one period of the baudrate clock source.
● _UART2
<1> Data length : 8 bits (LSB first)
<2> Start bits : 1 bit
<3> Stop bits : 1/2 bit
<4> Parity bits : None/even parity/odd parity
<5> Transfer rate : 8 to 4096 cycle
<6> Baudrate source clock: System clock/OSC0/OSC1/P26 input signal
<7> Wakeup function
<8> Full duplex communication
Note: The “cycle” refers to one period of the baudrate clock source.
www.onsemi.com
3