LC88FC2D0B Datasheet, PDF (11/47 Pages) ON Semiconductor – 16-bit Microcontroller 256K-byte Flash ROM / 24Kbyte RAM / 100-pin

LC88FC2D0B
Continued from preceding page.
Pin Name
Port 3
P30 to P37
Port 4
P40 to P47
Port 5
P50 to P57
Port 6
P60 to P67
Port 7
P70 to P77
I/O
Description
I/O ^● 8-bit I/O port
● _{I/O specifiable in 1-bit units}
● _{Pull-up resistors can be turned on and off in 1 bit units}
● _{Pin functions}
P30: INT0 input/HOLD release/timer 2L capture input
P31: INT1 input/HOLD release/timer 2H capture input
P32: INT2 input/HOLD release/timer 2 event input/timer 2L capture input/
Infrared Remote Controller Receiver input
P33: INT3 input/HOLD release/timer 2 event input/timer 2H capture input
P34: UART3 receive
P35: UART3 transmit
P36: Timer 6 output
P37: Timer 7 output
Interrupt acknowledge type
INT0 to INT3: H level, L level, H edge, L edge, both edges
I/O ^● 8-bit I/O port
● _{I/O specifiable in 1-bit units}
● _{Pull-up resistors can be turned on and off in 1 bit units}
● _{Pin functions}
P40: INT6 input/HOLD release input
P41: INT7 input/HOLD release input
P43: SIO1 data output
P44: SIO1 data input/bus input/output
P45: SIO1 clock input/output
P46: PWM0A output
P47: PWM0Boutput
Interrupt acknowledge type
INT6, INT7: H level, L level, H edge, L edge, both edges
I/O ^● 8-bit I/O port
● _{I/O specifiable in 1-bit units}
● _{Pull-up resistors can be turned on and off in 1 bit units}
● _{HOLD release input}
● _{Port 0 interrupt input}
I/O ^● 8-bit I/O port
● _{I/O specifiable in 1-bit units}
● _{Pull-up resistors can be turned on and off in 1 bit units}
● _{Pin functions}
AN0 (P60) to AN7 (P67): AD converter input port
I/O ^● 8-bit I/O port
● _{I/O specifiable in 1-bit units}
● _{Pull-up resistors can be turned on and off in 1 bit units}
● _{Pin functions}
AN8 (P70) to AN15 (P77): AD converter input port
Continued on next page.
www.onsemi.com
11