LC89057W-VF4A-E Datasheet, PDF (44/59 Pages) Sanyo Semicon Device – Digital Audio Interface Transceiver

LC89057W-VF4A-E
CCB address: 0xE8; Command address: 6; Demodulation function: Digital data input/output port setting
DI7
DI6
DI5
DI4
DI3
DI2
DI1
DI0
0
1
1
0
0
0
CAU
CAL
DI15
RXOFF
DI14
ROSEL2
DI13
ROSEL1
DI12
ROSEL0
DI11
ULSEL
DI10
RISEL2
DI9
RISEL1
DI8
RISEL0
RISEL [2:0]
Data demodulation input pin setting
000: RX0 selection (initial value)
001: RX1 selection
010: RX2 selection
011: RX3 selection
100: RX4 selection (However, VI input is performed when VISEL is set.)
101: RX5 selection (However, UI input is performed when UISEL is set.)
110: RX6 selection
111: Modulation function output (TXO output data) selection
ULSEL
Setting of input pin via PLL unlock
0: Normal setting (initial value)
1: Setting of input data switching via PLL unlock
ROSEL [2:0]
RXOUT output data setting
000: RX0 input data (initial value)
001: RX1 input data
010: RX2 input data
011: RX3 input data
100: RX4 input data
101: RX5/VI input data
110: RX6/UI input data
111: Modulation function output (TXO output data) selection
RXOFF
Setting of RXOUT output status
0: ROSEL[2:0] selection data output (initial value)
1: "L" fixed output
• _{ULSEL can be set when the oscillation amplifier is set to the permanent continuous operation mode with}
AMPOPR[1:0]. ULSEL does not work correctly when the oscillation amplifier is stopped.
No.7202-44/59