|
LC88FC2H0A Datasheet, PDF (4/48 Pages) ON Semiconductor – 16-bit Microcontroller | |||
|
◁ |
LC88FC2H0A
â UART0
<1> Data length
: 8 bits (LSB first)
<2> Start bits
: 1 bit
<3> Stop bits
: 1 bit
<4> Parity bits
: None/even parity/odd parity
<5> Transfer rate
: 4/8 cycle
<6> Baudrate source clock : P07 input signal used as a 1 cycle signal (T0PWMH can be used as a clock source) or
Timer4 cycle.
<7> Full duplex communication
Note : The âcycleâ refers to one period of the baudrate clock source.
â UART2
<1> Data length
: 8 bits (LSB first)
<2> Start bits
: 1 bit
<3> Stop bits
: 1/2 bit
<4> Parity bits
: None/even parity/odd parity
<5> Transfer rate
: 8 to 4096 cycle
<6> Baudrate source clock : System clock/OSC0/OSC1/P26 input signal
<7> Wakeup function
<8> Full duplex communication
Note : The âcycleâ refers to one period of the baudrate clock source.
â UART3
<1> Data length
: 8 bits (LSB first)
<2> Start bits
: 1 bit
<3> Stop bits
: 1/2 bit
<4> Parity bits
: None/even parity/odd parity
<5> Transfer rate
: 8 to 4096 cycle
<6> Baudrate source clock : System clock/OSC0/OSC1/P36 input signal
<7> Wakeup function
<8> Full duplex communication
Note : The âcycleâ refers to one period of the baudrate clock source.
ï¢ AD converter
<1> 12/8 bits resolution selectable
<2> Analog input : 16 channels
<3> Comparator mode
ï¢ PWM
â PWM0 : Multifrequency 12-bit PWM ï´ 2 channels (PWM0A and PWM0B)
<1> 2-channel pairs controlled independently of one another
<2> Clock source selectable from system clock or OSC1
<3> 8-bit prescaler : TPWMR0= (prescaler value + 1) ï´ clock period
<4> 8-bit fundamental wave PWM generator circuit + 4-bit additional pulse generator circuit
<5> Fundamental wave PWM mode
Fundamental wave period
: 16 TPWMR0 to 256 TPWMR0
High pulse width
: 0 to (Fundamental wave period - TPWMR0)
<6> Fundamental wave + additional pulse mode
Fundamental wave period
: 16 TPWMR0 to 256 TPWMR0
Overall period
: Fundamental wave period ï´ 16
High pulse width
: 0 to (Fundamental wave period - TPWMR0)
ï¢ CRC operating circuit
ï¢ Watchdog timer
<1> Driven by the base timer + internal watchdog timer dedicated counter
<2> Interrupt or reset mode selectable
No.A2183-4/48
|
▷ |