LC88FC2H0A Datasheet, PDF (38/48 Pages) ON Semiconductor – 16-bit Microcontroller

Parameter
HALT mode
consumption
current
(Note 7-1)
LC88FC2H0A
Continued from preceding page.
Symbol
Applicable
Pin/Remarks
Conditions
VDD [V] min
Specification
typ
max
unit
IDDHALT (1)
VDD1
=VDD2
=VDD3
=VDD4
 HALT mode
 FmCF=12 MHz ceramic oscillator mode
 FmX'tal=32.768 kHz crystal oscillation
mode
3.0 to 3.6
 System clock set to 12 MHz
 Internal RC oscillation stopped
 1/1 frequency division mode
1.7
3.5
IDDHALT (2)
 HALT mode
 FmCF=10 MHz ceramic oscillator mode
 FmX'tal=32.768 kHz crystal oscillator
mode
2.7 to 3.6
 System clock set to 10 MHz
 Internal RC oscillation stopped
 1/1 frequency division mode
1.5
3.2
mA
IDDHALT (3)
 HALT mode
 FmCF=0Hz (oscillation stopped)
 FmX'tal=32.768 kHz crystal oscillator
mode
 System clock set to internal RC
oscillation
 1/1 frequency division mode
2.7 to 3.6
0.2
0.8
IDDHALT (4)
 HALT mode
 FmCF=0Hz (oscillation stopped)
 FmX'tal=32.768 kHz crystal oscillator
mode
 System clock set to 32.768 kHz
 Internal RC oscillation stopped
 1/1 frequency division mode
2.7 to 3.6
8.5
65
A
Continued on next page.
No.A2183-38/48