English
Language : 

LC88FC2H0A Datasheet, PDF (17/48 Pages) ON Semiconductor – 16-bit Microcontroller
LC88FC2H0A
Continued from preceding page.
Parameter
Symbol
Applicable Pin
/Remarks
Conditions
VDD [V] min
Specification
typ
max unit
Peak output
IOPL (1) Ports 0, 1, 3, 4
Per applicable pin
current
Ports 7, D
P20, P21, P24 to P27
15
PA0 to PA4, PA6, PA7
PB0 to PB4, PB6,
IOPL (2) P22, P23
Per applicable pin
PA4, PA5
20
PB4, PB5
IOPL (3) Ports 5, 6
Per applicable pin
PC0 to PC4
7.5
Average output IOML (1) Ports 0, 1, 3, 4
Per applicable pin
current
Ports 7, D
(Note 1-1)
P20, P21, P24 to P27
12.5
PA0 to PA4, PA6, PA7
PB0 to PB4, PB6, PB7
IOML (2) P22, P23
Per applicable pin
PA4, PA5
15
PB4, PB5
IOML (3) Ports 5, 6
Per applicable pin
PC0 to PC4
5
Total output
current
IOAL (1) Ports 5
PC0 to PC2
Total of currents at
applicable pins
10
mA
IOAL (2) Port 6
Total of currents at
PC3 to PC4
applicable pins
10
IOAL (3) Port 5, 6
Total of currents at
PC0 to PC4
applicable pins
20
IOAL (4) Ports 1, D
Total of currents at
P20, P21
applicable pins
35
IOAL (5) P22 to P27
Total of currents at
applicable pins
35
IOAL (6) Ports 1, 2, D
Total of currents at
applicable pins
70
IOAL (7) Port 4
Total of currents at
applicable pins
35
IOAL (8) Port 0, 3
Total of currents at
applicable pins
35
IOAL (9) Port 0, 3, 4
Total of currents at
applicable pins
70
IOAL (10) Port 7, B
Total of currents at
applicable pins
35
IOAL (11) Port A
Total of currents at
applicable pins
35
IOAL (12) Port 7, A, B
Total of currents at
applicable pins
70
Allowable power
Pd max TQFP100
Ta = 40 to +85C
dissipation
Package with thermal
resistance bord
460 mW
(Note 1-2)
Operating ambient
Topr
temperature
Storage ambient
Tstg
temperature
40
+85
C
55
+125
Note 1-1 : Average output current refers to the average of output currents measured for a period of 100 ms.
Note 1-2 : SEMI standerds thermal resistance board ( size : 76.1 114.3  1.6 tmm, glass epoxy ) is used.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
No.A2183-17/48