LC88FC3K0A Datasheet, PDF (36/48 Pages) ON Semiconductor – 16-bit Microcontroller

LC88FC3K0A
UART0 Operating Conditions at Ta=–40 to +85C, VSS1=VSS2=VSS3=VSS4=0V
Parameter
Transfer rate
Symbol
UBR0
Applicable
Pin/Remarks
U0RX (P13),
U0TX (P14),
U0BRG
(P07)
Conditions
VDD [V] _min
Specification
typ
max
2.7 to 3.6
4
8
Note 4-9 : tBGCYC denotes one cycle of the baudrate clock source.
unit
tBGCYC
UART2 Operating Conditions at Ta=–40 to +85C, VSS1=VSS2=VSS3=VSS4=0V
Parameter
Transfer rate
Symbol
UBR2
Applicable
Pin/Remarks
U2RX (P16),
U2TX (P17),
Conditions
VDD [V] _min
Specification
typ
max
2.7 to 3.6
8
4096
unit
tBGCYC
Note 4-10: tBGCYC denotes one cycle of the baudrate clock source.
UART3 Operating Conditions at Ta=–40 to +85C, VSS1=VSS2=VSS3=VSS4=0V
Parameter
Transfer rate
Symbol
UBR3
Applicable
Pin/Remarks
U3RX (P34),
U3TX (P35),
Conditions
VDD [V] min
Specification
typ
max
2.7 to 3.6
8
4096
unit
tBGCYC
Note 4-10 : tBGCYC denotes one cycle of the baudrate clock source.
■ Pulse Input Conditions at Ta=–40 to +85C, VSS1=VSS2=VSS3=VSS4=0V
Parameter
Symbol Applicable Pin/Remarks
Conditions
VDD [V] min
High/low level
pulse width
tPIH (1)
tPIL (1)
INT0 (P30),
INT1 (P31),
INT2 (P32),
INT3 (P33),
INT4 (P20),
INT5 (P21),
INT6 (P40),
INT7 (P41)
 Interrupt source flag can be
set.
 Event inputs for timers 2 and
3 are enabled.
2.7 to 3.6 2
Specification
typ max unit
tCYC
tPIL (2) RESB
Resetting is enabled.
2.7 to 3.6 10
s
www.onsemi.com
36