LC88FC3K0A Datasheet, PDF (17/48 Pages) ON Semiconductor – 16-bit Microcontroller

Continued from preceding page.
LC88FC3K0A
Parameter
Symbol
Applicable Pin
/Remarks
Conditions
VDD [V] _min
Specification
typ
max unit
Peak output
current
Average output
current
(Note 1-1)
Total output
current
Allowable power
dissipation
Operating ambient
temperature
Storage ambient
temperature
IOPL (1)
IOPL (2)
IOPL (3)
IOML (1)
IOML (2)
IOML (3)
IOAL (1)
IOAL (2)
IOAL (3)
IOAL (4)
IOAL (5)
IOAL (6)
IOAL (7)
IOAL (8)
IOAL (9)
IOAL (10)
IOAL (11)
IOAL (12)
Pd max
Topr
Tstg
Ports 0, 1, 3, 4
Per applicable pin
Ports 7, D
P20, P21, P24 to P27
PA0 to PA4, PA6,
PA7
PB0 to PB4, PB6,
P22, P23
Per applicable pin
PA4, PA5
PB4, PB5
Ports 5, 6
Per applicable pin
PC0 to PC4
Ports 0, 1, 3, 4
Per applicable pin
Ports 7, D
P20, P21, P24 to P27
PA0 to PA4, PA6,
PA7
PB0 to PB4, PB6,
PB7
P22, P23
Per applicable pin
PA4, PA5
PB4, PB5
Ports 5, 6
Per applicable pin
PC0 to PC4
Ports 5
Total of currents at
PC0 to PC2
applicable pins
Port 6
Total of currents at
PC3 to PC4
applicable pins
Port 5, 6
Total of currents at
PC0 to PC4
applicable pins
Ports 1, D
Total of currents at
P20, P21
applicable pins
P22 to P27
Total of currents at
applicable pins
Ports 1, 2, D
Total of currents at
applicable pins
Port 4
Total of currents at
applicable pins
Port 0, 3
Total of currents at
applicable pins
Port 0, 3, 4
Total of currents at
applicable pins
Port 7, B
Total of currents at
applicable pins
Port A
Total of currents at
applicable pins
Port 7, A, B
Total of currents at
applicable pins
TQFP100
Ta=40 to +85C
Package with thermal
resistance bord
(Note 1-2)
15
20
7.5
12.5
15
5
10
mA
10
20
35
35
70
35
35
70
35
35
70
460 mW
40
+85
C
55
+125
Note 1-1 : Average output current refers to the average of output currents measured for a period of 100 ms.
Note 1-2 : SEMI standerds thermal resistance board (size : 76.1 114.3  1.6 tmm, glass epoxy) is used.
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
www.onsemi.com
17