LC88FC3K0A Datasheet, PDF (2/48 Pages) ON Semiconductor – 16-bit Microcontroller

LC88FC3K0A
Function Details
 Xstromy16 CPU
 4G-byte address space
 General-purpose registers : 16 bits  16 registers
 Flash ROM
 _{786432  8 bits}
 _{Programming voltage level : 2.7 to 3.6V.}
 _{Block-erasable in 2K byte units.}
 _{Data written in 2-byte units.}
 RAM
 _{48640  8 bits}
 Minimum instruction cycle time (tCYC)
 _{100 ns (10 MHz), VDD = 2.7 to 3.6V}
 Ports
 _{Normal withstand voltage I/O ports}
Ports whose I/O direction can be designated in 1 bit units : 86 (P0n P1n, P2n, P3n, P4n, P5n, P6n, P7n, PAn
PB0 to PB6, PC2, PD0 to PD5)
 _{Oscillation/normal withstand voltage I/O ports}
: 4 (PC0, PC1, PC3, PC4)
 _{Reset pins}
: 1 (RESB)
 _{TEST pins}
: 1 (TEST)
 _{Power pins}
: 8 (VSS1 to 4, VDD1 to 4)
 Timers
 _{Timer 0 : 16-bit timer that supports PWM/toggle outputs}
<1> 5-bit prescaler
<2> 8-bit PWM  2, 8-bit timer + 8-bit PWM mode selectable
<3> Clock source selectable from system clock, OSC0, OSC1, and internal RC oscillator.
 _{Timer 1 : 16-bit timer with capture registers}
<1> 5-bit prescaler
<2> May be divided into 2 channels of 8-bit timer
<3> Clock source selectable from system clock, OSC0, OSC1, and internal RC oscillator
 _{Timer 2 : 16-bit timer with capture registers}
<1> 4-bit prescaler
<2> May be divided into 2 channels of 8-bit timer
<3> Clock source selectable from system clock, OSC0, OSC1, and external events
 _{Timer 3 : 16-bit timer that shpports PWM/toggle outputs}
<1> 8-bit prescaler
<2> 8-bit timer 2ch or 8-bit timer+8-bit PWM mode selectable
<3> Clock source selectable from system clock, OSC0, OSC1, and external events
 _{Timer 4 : 16-bit timer that supports toggle outputs}
<1> Clock source selectable from system clock and prescaler 0
 _{Timer 5 : 16-bit timer that supports toggle output}
<1> Clock source selectable from system clock and prescaler 0
 _{Timer 6 : 16-bit timer that supports toggle outputs}
<1> Clock source selectable from system clock and prescaler 1
 _{Timer 7 : 16-bit timer that supports toggle output}
<1> Clock source selectable from system clock and prescaler 1
*Prescaler 0 and 1 are consisted of 4bits and can choose their clock source from OSC0 or OSC1.
 _{Base timer}
<1> Clock may be selected from OSC0 (32.768 kHz crystal oscillator) and frequency-divided output of
system clock.
<2> Interrupts can be generated in 7 timing schemes.
www.onsemi.com
2