AMIS-30622 Datasheet, PDF (22/42 Pages) AMI SEMICONDUCTOR – I2C Microstepping Motordriver

AMIS-30622
The application should limit the number of consecutive GetFullStatus1 commands to try to get the AMIS-
30622 out of Shutdown mode when this proves to be unsuccessful, e.g. there is a permanent defect. The
reliability of the circuit could be altered since GetFullStatus1 attempts to disable the protection of the H-
bridges.
Note
The priority encoder (see § 9.2.2.11 Priority encoder) is describing the management of states and
commands. The table above is to be considered illustrative.
Rev. 3 | Page 22 of 42 | www.onsemi.com