E3X-NH Datasheet, PDF (38/40 Pages) Omron Electronics LLC – Fine Tuning Fiber Photoelectric Sensor

E3X-NH
Use the attached saddle to secure the end cap of the Protective Spi-
ral Tube. To secure the Protective Spiral Tube at a position other
than the end cap, apply tape to the tube so that the portion becomes
thicker in diameter.
E3X-NH
! ^WARNING
The E3X-NH/NHB is not a safety component for ensuring the
safety of people as defined in EC Directive 91/368/EEC, or as
covered by separate European standards or by any other reg-
ulations or standards.
Saddle
Tube
End cap
Reflector
Observe the Following Precautions when Using the Reflec-
tor (E39-R3)
Use detergent, etc., to remove any dust or oil from the surfaces
where tape is applied. Adhesive tape will not be attached properly if
oil or dust remains on the surface.
The E39-R3 cannot be used in places where it is exposed to oil or
chemicals.
38