E3X-NH Datasheet, PDF (3/40 Pages) Omron Electronics LLC – Fine Tuning Fiber Photoelectric Sensor

E3X-NH
E3X-NH
Indicates models that allow free cutting. Models without this mark do not allow free cutting.
: E3X-NH
: E3X-NHB
Applicatio
n
Features
Appearance
Chemical-
resistant
Teflon-covered*⁴; withstands
chemicals and harsh
environments
(operating ambient temperature:
–30jC to 70jC)
Teflon covered*⁴ ; side-view;
withstands chemicals and harsh
environments (operating ambient
temperature: –30jC to 70jC)
Heat-resis
tant
Resists 150°C*³; fiber sheath
material: fluororesin (operating
ambient temperature: –40jC to
150jC)
5-mm dia.
5-mm dia.
M4 screw
Sensing distance (mm) *1
(Values in parentheses: when
using the E39-F1 Lens Unit)
1,600
220
Standard
object
(min. sensing
object:
opaque)
4.0-mm dia.
(0.12-mm dia.)
Model
E32-T12F
3.0-mm dia. E32-T14F
(0.12-mm dia.)
200
1.5-mm dia. E32-T51
400
(0.4-mm dia.)
35
Side-view; resists 150°C*³ ;
suitable for detecting minute
sensing objects; fiber sheath
material: fluororesin (operating
ambient temperature: –40jC to
150jC)
Resists 300°C*⁵, with spiral tube;
high mechanical strength; fiber
sheath material: stainless steel
(operating ambient temperature:
–40jC to 300jC)
2-mm dia.
M4 screw
1.0-mm dia. E32-T54
(0.16-mm dia.)
130
300
(3,000)
1.0-mm dia. E32-T61
(0.12-mm dia.)
Resists 200°C*⁵; L-shaped; fiber
sheath material: stainless steel
1.7-mm dia. E32-T84S
(0.12-mm dia.)
700
Permis-
sible
bending
radius
40 mm
35 mm
25 mm
Slot
Suitable for film sheet detection;
no optical axis adjustment
required; easy to mount
10
4.0-mm dia. E32-G14
(0.16-mm dia.)
25 mm
Narrow
vision
field
Suitable for detecting wafers;
3-mm dia.
1,000
1.7-mm dia. E32-T22S
(0.08-mm dia.)
10 mm
Side-view; suitable for detecting
wafers;
3.5 x 3 mm dia.
2-mm dia.
E32-T24S
(0.04-mm dia.)
700
Area
sensing
through-b
eam
Multi-point
sensing (4-head)
Stable for detecting minute
sensing objects in a wide area;
degree of protection: IEC60529
IP50
M3 screw
2.0-mm dia. E32-M21
300
(0.04-mm dia.)
(0.4-mm
dia.)*⁶
600
E32-T16P
Suitable for detecting over a
10-mm area; long distance
10 mm
1,500
700
(2.0-mm
dia.)*⁶
E32-T16
Note:
1. For common specifications of the Fiber Unit, refer to page 6.
2. The size of standard sensing object is the same as the fiber core diameter (lens diameter for models with lens).
3. The sensing distance of the minimum sensing object indicates the rated sensing distance unless otherwise specified.
*¹ Sensing distance indicates values for white paper.
*² For continuous operation, use the products within the temperature ranging from –40jC to 130jC.
*³ Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.
*⁴ Indicates the heat-resistant temperature at the fiber tip. For further details, refer to page 26.
*⁵ Indicates values for the sensing distance of 100 mm.
25 mm
10 mm
25 mm
3