E3X-NH Datasheet, PDF (26/40 Pages) Omron Electronics LLC – Fine Tuning Fiber Photoelectric Sensor

E3X-NH
E32-M21
Sensing head
M3 x 0.35
(SUS303)
Two hexagon clamping nuts
Two toothed washers
Silicone tube (see note)
Plastic fibers, four, 1 dia.
E3X-NH
Note: One set of silicone tubes is black while the other
set is grey for easy identification when they are
connected to the emitter and receiver.
Sleeve
E32-T51
1.5 dia.
Two hexagon clamping nuts
Two toothed washers
Sensing head M4 x 0.7 (nickel-plated brass)
Optical fiber, 2.2 dia.
2.85 dia.
Note: Resistant temperature is 150°C.
Resistant temperature is 130°C
when used continuously.
E32-T54
Sensing surface
3 dia.
2 dia.
Sensing head (stainless)
Optical fiber, 2.2 dia.
Note: Resistant temperature is 150°C.
Resistant temperature is 130°C
when used continuously.
E32-T61
1.0 dia.
Two hexagon clamping nuts
Two
toothed washers
Sensing head M4 x
(SUS303)
0.7
SUS flexible tube
2.8 dia.
Hexagon clamping
4 dia. 5 dia.
screw
Sleeve
4 dia.
(See note)
E32-T84S
Note: Section A resists 300°C and section B (which is inserted to the Amplifier) resists 110°C.
The operating temperature of the section to be inserted (marked with *) must be within
the operating temperature range of the Amplifier.
2,000 (standard length)
(See note)
3 dia.
4 dia.
3 dia.
3.5 dia.
Sensing head
(stainless)
2.9-dia flexible
tube (stainless)
4 dia. 5 dia. Sleeve
Lens (2 dia.)
Note: Section A resists 200°C and section B (which is inserted to the Amplifier) resists 110°C.
The operating temperature of the section to be inserted (marked with *) must be within
the operating temperature range of the Amplifier.
26