E3X-NH Datasheet, PDF (29/40 Pages) Omron Electronics LLC – Fine Tuning Fiber Photoelectric Sensor

E3X-NH
E32-D32L
E32-D14L
Light emission fiber
(1 dia.)
Light reception fiber
(sixteen, 0.265 dia.)
Sensing head, 3 dia. (stainless)
Branching box, 6 dia. ^{Optical fibers, two, 2.2 dia.}
(heat-resistive ABS
black resin)
Note: The fiber for the emitter is identified by a yellow dotted line.
Sensing head
(stainless)
Heat-shrinking tubing
Optical fiber, two, 2.2 dia.
E3X-NH
E32-D24
6 dia.
Light baffle
Sensing surface
Sensing head (S2UdSia3.034)dia.Heat-shrinking _{tubing Optical fibers, two, 1 dia.}
Two fiber attachments (E39-F9)
Light baffle Sensing surface
E32-D12F
Sensing head, 6 dia.
Fluoride resin
5 dia.
Optical fiber, two, 2.2 dia.
E32-D51
E32-D61
Two hexagon clamping nuts
Two, 1.5 dia.
Two toothed washers
Sensing head,M6 x 0.75*
Optical fiber, two, 2.2 dia.
*nickel-plated brass
Note: Resistant temperature is 150°C.
Resistant temperature is 130°C
when used continuously.
Two hexagon clamping nuts
Two toothed washers
1.4 dia. M4 x 0.7
Sensing head
(SUS303) M6 x 0.75
5 dia. ^{3.5 dia.}
SUS
flexible
tube
Hexagon
clamping _{5 dia.}
screw
SUS303
Sleeve
(see note)
Note: Section A resists 300°C and section B (which is inserted to the Amplifier) resists 110°C. The operat-
ing temperature of the section to be inserted (marked with *) must be within the operating tempera-
ture range of the Amplifier.
29