E3X Datasheet, PDF (31/64 Pages) Omron Electronics LLC – Optical Fiber Photoelectric Sensor

E3X
Nomenclature
E3X-Tjj
E3X-H11
Stable Operation
Indicator (Green Indicator)
Tuning Indicator (Two
Colors: red/green indicator)
Tuning Button
Light Reception
Indicator (Red
Indicator)
Stable Operation
Indicator (Green Indicator)
Sensitivity Indicator
The position of the indicator
can be checked.
8-turn Sensitivity Adjuster
Operation Mode Selector
L-ON: Output transistor is ON
when light is received.
D-ON: Output transistor is ON
when light is not received.
Mode Setting Selector
Timer Switch
ON: Timer function
is ON.
OFF: Timer function
is OFF.
Mode Selector
SET: The light source
flashes. Set to this
mode to adjust the
light axis.
Light Reception
L-ON: Output transistor is ON
Monitoring Terminal
when light is received.
(see note)
D-ON: Output transistor is ON
Monitoring is used
when light is not re-
with the E39-VX
ceived.
Beam Checker
Note: The light reception monitoring terminal is not available with the E3X-T11.
E3X-A11/-A41
E3X-VG11
Stable Operation
Indicator (Green
Indicator)
8-turn Sensitivity
Adjuster
E3X-A21/-A51
E3X-F21/-F51
E3X-VG21
Light Reception
Indicator (Red In-
dicator)
Sensitivity Indicator
Sensitivity adjustment
can be checked visually.
Stable Operation
Indicator (Green Indicator)
Sensitivity Indicator
8-turn Sensitivity
Adjuster
E3X
Light Reception
Indicator (Red
Indicator)
Hysteresis Adjuster
Timer Switch
ON: Timer function
is ON.
OFF: Timer function
is OFF.
Light Reception
Monitoring Terminal
Monitoring is used
with the E39-VX Beam
Checker
Light Reception
Indicator (Red
Indicator)
Timer Adjuster
Mode Selector
SET: The light source
flashes. Set to this
mode to adjust the
light axis.
L-ON: Output transistor is ON
when light is received.
D-ON: Output transistor is ON
when light is not re-
ceived.
Light Reception
Monitoring Terminal
Monitoring is used
with the E39-VX
Beam Checker
Note: Set the mode selector to L-ON or D-ON after the
light axis is adjusted.
Mode Selector
SET: The light source
flashes. Set to this
mode to adjust the
light axis.
L-ON: Output transistor is ON
when light is received.
D-ON: Output transistor is ON
when light is not re-
ceived.
Timer Switch
ON: Timer function
is ON.
OFF: Timer function
is OFF.
Light Reception
Monitoring Terminal
Monitoring is used
with the E39-VX Beam
Checker
31