E3X Datasheet, PDF (17/64 Pages) Omron Electronics LLC – Optical Fiber Photoelectric Sensor

E3X
Spiral Tubes
Model
Appearance
E3X
E39-F32A5 E39-F32A E39-F32B5 E39-F32B E39-F32C5 E39-F32C E39-F32D5 E39-F32D
L
Length (L)
Applicable fiber
Ambient temperature
Ambient humidity
Permissible bending
radius
Tensile strength
Compression load
Accessories
Name
Model
Appearance
500 mm
1,000 mm
E32-DC200E
E32-DC200F(4)
E32-D21
End cap
Tube
Head connector
500 mm
1,000 mm 500 mm
1,000 mm
E32-TC200E
E32-TC200F(4)
E32-T21
E32-T21L
E32-TC200
E32-TC200B(4)
E32-T11
E32-T51
E32-T11L
Operating: –40°C to 150°C (Do not exceed the operating temperature of the fiber)
Operating: 35% to 85%
R: 30 mm min.
500 mm 1,000 mm
E32-DC200
E32-DC200B(4)
E32-CC200
E32-D11
E32-D51
E32-D11L
Between head connector and end cap with tube: 15 kgf $ cm max. (1.5 N $ m)
Tube: 20 kgf $ cm max. (2 N $ m)
Tube: 3 kg max. (29.4 N)
Fiber Cutter
E39-F4
Fine-fiber Attachment
E39-F9
Fiber Connector
E39-F10
Sleeve Bender
E39-F11
Features
Applicable fiber
Used to cut fibers to
desired lengths
All models equipped with
trimmable fibers
Used when inserting fine
fibers into the amp
E32-DC200E, -TC200E
E32-DC200F(4),
-TC200F(4)
E32-D21, -D21L, -D22L
E32-T21, -T21L, -T22L
E32-D32, -T22
E32-D24. -T24
E32-D33
E32-R21
Used to connect fibers
when broken
E32-DC200, -TC200
E32-DC200B(4),
-TC200B(4)
E32-TC200A
E32-T14, -G14
E32-D11L, -T11L, -T12L
E32-D14L, -T14L
E32-T17L
Used to bend fiber
sleeves
E32-TC200B(4)
E32-TC200D(4)
E32-DC200F(4),
-TC200F(4)
E32-DC9G(4)
17