K3NC Datasheet, PDF (13/23 Pages) Omron Electronics LLC – Up/Down Counting Meter

Nomenclature
1. SV Display
2. PV Display
3. Comparative Output
Status Indicators
4. SV Display Status
OUT5
OUT4
OUT3
OUT2
OUT1
12 3
OUT 4 5
7. Status Indicators
8. Teaching Indicator
5. ESC Key
6. Mode Key
Name
1. SV display
2. PV display
3. Comparative output
status indicators
4. SV display status
5. ESC Key
6. Mode Key
7. Status indicator
8. Teaching indicator
9. RESET/TEACH Key
10. Up Key and Shift Key
9. RESET/TEACH Key
10. Up Key and Shift Key
Functions
Displays the set value or parameter. Available for Set Value LED Models only.
Displays the process value or parameter.
Displays the status of comparative output.
Indicates which comparative set value is currently on the SV display.
Used to return to the RUN mode from the Setting, Protect or Maintenance mode.
Used to enter the Setting mode.
Used to allow the PV display to indicate set values sequentially. Available for Basic Models only.
Used to indicate set values sequentially on the SV display. Available for Set Value LED Models only.
RESET: Lit when the RESET input is ON.
PROG: Lit or flashes while parameters are being set.
Lit when the teaching function is enabled and flashes when the K3NC is in teaching operation.
The counting value is reset by pressing this key.
Teaching is available when the teaching function is enabled.
The digit being set is scrolled by pressing the Shift Key. The set value increases by one whenever the Up Key is
pressed.
Up/Down Counting Meter K3NC C-143