K34-C1 Datasheet, PDF (10/16 Pages) Omron Electronics LLC – An Ideal Indicator for OK/NG Judgements in Automated and Picking Machines, Measuring Factors such as Pressure, Load, Torque, and Weight Using Load Cell Signal Input.

■ Connections
Terminal Arrangement
Note: Insulation is used between signal input, event input, output, and power supply terminals.
A Operating Power Supply
100 to 240 VAC
24 VAC/ VDC
A1
A2
A
1
2
3
4
5
6
BC
D
E
*Check the required power supply type.
K3HB-V
B Sensor Power Supply/Output
Sensor power supply +
PASS output
B1
PASS B2
B3
N/C B4
+
B5
− ^B6
<K33-
CPE>
<K33-
CPB>
<K33-
CPA>
Sensor power supply +
linear output
0-5/1-5/
0-10 V
N/C
0-5/1-5/
0-10 V
N/C
0-5/1-5/
0-10 V
N/C
+ _B1
− ^B2
N/C
0-20/
4-20 mA
N/C
0-20/
4-20 mA
N/C
0-20/ ^{+ B3}
4-20 mA _{− B4}
+
B5
− ^B6
<K33- <K33- <K33- <K33- <K33- <K33-
L2E> L1E> L2B> L1B> L2A> L1A>
Sensor power supply
B1
B2
N/C
B3
B4
+ _B5
− ^B6
<K33-E> <K33-B> <K33-A>
Sensor power supply +
communications
B (+) SD B (+) SD B (+) SD
B1
A (−) RD A (−) RD A (−) RD
B2
B (+) SG B (+) SG B (+) SG
B3
A (−) N/C
A (−) N/C A (−) N/C
B4
+
B5
− ^B6
RS-485 RS-232C RS-485 RS-232C RS-485 RS-232C
<K33- <K33- <K33- <K33- <K33- <K33-
FLK3E> FLK1E> FLK3B> FLK1B> FLK3A> FLK1A>
C Relays, Transistors, BCD and DeviceNet
Relay Outputs
<C1>
C1
H ^C2
C3
C4
L C5
C6
Relay Outputs
<C2>
HH C1
H C2
COM C3
L C4
LL C5
COM C6
BCD (NPN Open Collector): BCD
Applicable Connector (Sold separately)
HDR-E50MAG1
(HONDA TSUSHIN KOGYO CO., LTD.)
Special Cable (Sold separately)
K32-BCD (OMRON)
(HDR-E50MAG1 with 0.3-m cable)
Transistor Outputs DeviceNet Connector (Included)
<T1> <T2>
<DRT>
HH C1
H C2
PASS C3
L C4
LL C5
COM C6
NPN
PNP
1: V− (Power supply cable: Black)
2: CAN L (Communications cable: Blue)
3: Shield
4: CAN H (Communications cable: White)
5: V+ (Power supply cable: Red)
Applicable Connector:
HR31-5.08P-5SC (01)
(HIROSE ELECTRIC CO., LTD.)
* Attach the provided crimp terminals.
The BCD COMMON is shared.
The pins indicated in the above diagram
as blank (white) boxes have been removed.
*Only _{one of the following can be used for each Digital Indicator: communications, BCD, or DeviceNet.}
Contact output
Transistor Output
(NPN Open Collector)
5V
HH
H
L
LL
PASS
HH
H
L
LL
PASS
Safety Standards Conformance
• Always use a EN/IEC-compliant power supply with reinforced insulation or
double insulation for the DeviceNet power supply.
• The product must be used indoors for the above applicable standards to
apply.
• The K3HB-XVA@@ complies with UL standards when the applied input
voltage is within the range 0 to 150 VAC.
10