DS90UR907Q_10 Datasheet, PDF (5/26 Pages) National Semiconductor (TI) – 5 - 65 MHz 24-bit Color FPD-Link to FPD-Link II Converter

Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage – V_DDn (1.8V)
Supply Voltage – V_DDIO
LVCMOS I/O Voltage
LVDS Input Voltage
Driver Output Voltage
Junction Temperature
−0.3V to +2.5V
−0.3V to +4.0V
−0.3V to (V_DDIO + 0.3V)
−0.3V to (V_DDIO + 0.3V)
−0.3V to (V_DDn + 0.3V)
+150°C
Storage Temperature
−65°C to +150°C
36L LLP Package
Maximum Power Dissipation
Capacity at 25°C
Derate above 25°C
 θ_JA
 θ_JC
1/ θ_JA°C/W
27.4 °C/W
4.5 °C/W
ESD Rating (IEC, powered-up only), R_D = 330Ω, C_S = 150pF
Air Discharge
(R_IN+, R_IN−)
≥±30 kV
Contact Discharge
(R_IN+, R_IN−)
≥±6 kV
ESD Rating (ISO10605), R_D = 330Ω, C_S = 150 & 330pF
Air Discharge
(R_IN+, R_IN−)
≥±15 kV
Contact Discharge
(R_IN+, R_IN−)
≥±8 kV
ESD Rating (ISO10605), R_D = 2kΩ, C_S = 150 & 330pF
Air Discharge
(R_IN+, R_IN−)
≥±15 kV
Contact Discharge
(R_IN+, R_IN−)
≥±8 kV
ESD Rating (HBM)
≥±8 kV
ESD Rating (CDM)
≥±1.25 kV
ESD Rating (MM)
≥±250 V
For soldering specifications:
see product folder at www.national.com and
www.national.com/ms/MS/MS-SOLDERING.pdf
Recommended Operating
Conditions
Supply Voltage (V_DDn)
LVCMOS Supply
Voltage (V_DDIO)
OR
LVCMOS Supply
Voltage (V_DDIO)
Operating Free Air
Temperature (T_A)
RxCLKIN Frequency
Supply Noise (Note 7)
Min
1.71
1.71
3.0
−40
5
Nom Max
1.8
1.89
1.8
1.89
3.3
3.6
+25 +105
65
100
Units
V
V
V
°C
MHz
mV_P-P
DC Electrical Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified. (Note 2, Note 3, Note 4)
Symbol
Parameter
Conditions
Pin/Freq. Min Typ Max Units
LVCMOS INPUT DC SPECIFICATIONS
V_DDIO = 3.0 to 3.6V
2.2
V_DDIO
V
V_IH
High Level Input Voltage
V_DDIO = 1.71 to 1.89V
V_DDIO = 3.0 to 3.6V
V_IL
Low Level Input Voltage
V_DDIO = 1.71 to 1.89V
PDB,
VODSEL,
MAPSEL,
CONFIG[1:0],
0.65*
V_DDIO
GND
GND
V_DDIO
V
0.8
V
0.35*
V_DDIO
V
I_IN
Input Current
V_IN = 0V or V_DDIO
V_DDIO = 3.0
to 3.6V
V_DDIO = 1.7
to 1.89V
BISTEN
−15
±1
+15
μA
−15
±1
+15
μA
FPD-LINK LVDS RECEIVER DC SPECIFICATIONS
V_TH
Differential Threshold High
Voltage
V_TL
Differential Threshold Low
Voltage
V_CM = 1.2V, Figure 1
|V_ID|
Differential Input Voltage
Swing
RxIN[3:0]+/-,
RxCLKIN+/-,
−100
200
+100
mV
600 mV
V_CM
Common Mode Voltage
V_DDIO = 3.3V
V_DDIO = 1.8V
I_IN
Input Current
0
1.2
2.4
V
0
1.2 1.55
−15
±1
+15
μA
5
www.national.com