OPA2830 Datasheet, PDF (33/43 Pages) National Semiconductor (TI) – Dual, Low-Power, Single-Supply, Wideband OPERATIONAL AMPLIFIER

OPA2830
www.ti.com.................................................................................................................................................. SBOS309D – AUGUST 2004 – REVISED AUGUST 2008
INPUT AND ESD PROTECTION
The OPA2830 is built using a very high-speed
complementary bipolar process. The internal junction
breakdown voltages are relatively low for these very
small geometry devices. These breakdowns are
reflected in the Absolute Maximum Ratings table. All
device pins are protected with internal ESD protection
diodes to the power supplies, as shown in Figure 86.
+V_CC
These diodes provide moderate protection to input
overdrive voltages above the supplies as well. The
protection diodes can typically support 30mA
continuous current. Where higher currents are
possible (that is, in systems with ±15V supply parts
driving into the OPA2830), current-limiting series
resistors should be added into the two inputs. Keep
these resistor values as low as possible, since high
values degrade both noise performance and
frequency response.
External
Pin
Internal
Circuitry
− V_CC
Figure 86. Internal ESD Protection
Copyright © 2004–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA2830
Submit Documentation Feedback
33