SM5903CF Datasheet, PDF (19/31 Pages) Nippon Precision Circuits Inc – compression and non compression type anti-shock memory controller

SM5903CF
83H ( MUTE, 12-bit comparison connection settings)
- MUTE (forced muting)
When 1: Outputs are instantaneously muted to
0.(note 1)
Same effect as taking the YDMUTE pin
HIGH.
When 0: No muting(note 1)
(note1) Effective at the start of a Left-channel out-
put data.
- MUTE, YDMUTE relationship
When all mute inputs are 0, mute is released.
- CMP12 (12-bit comparison connection)
When 1: Performs comparison connection using
only the most significant 12 bits of input
data.
When 0: Performs comparison connection using
all 16 bits of input data.
85H (option settings)
- RAMS1, RAMS2
When 0 and 0 : 1M DRAMs (256k×4 bits)×single
When 1 and 0 : 4M DRAMs (1M×4 bits)×single
When 0 and 1 : 4M DRAMs (1M×4 bits)×double
When 1 and 1 : 16M DRAMs (4M×4 bits)×single
- YFLGS, YFCKP
When 0 and 0: Sets FLAG6 on the falling edge of
YFCLK when YFLAG=0
When 0 and 1: Sets FLAG6 on the rising edge of
YFCLK when YFLAG=0
When 1 and 0: Sets FLAG6 when YFLAG=0
When 1 and 1: Sets FLAG6 when YFLAG=1
- COMPFB, COMP6B, COMP5B, COMP4B
When 0, 0, 0 and 1: Selects 4-bit compression
mode
When 0, 0, 1 and 0: Selects 5-bit compression
mode
When 1, 0, 0 and 0: Selects full-bit compression
mode
In all other cases: Selects 6-bit compression mode
Changing mode without initialize in opera-
tion is possible.
NIPPON PRECISION CIRCUITS-19