|
SM5902AF Datasheet, PDF (1/40 Pages) Nippon Precision Circuits Inc – compression and non compression type shock-proof memory controller | |||
|
NIPPON PRECISION CIRCUITS INC.
SM5902AF
compression and non compression type
shock-proof memory controller
Overview
The SM5902 is a compression and non compres-
sion type shock-proof memory controller LSI for
compact disc players. The compression level can
be set in 4 levels, and external memory can be
selected from 4 options (1M, 4M, 4MÃ 2, 16M).
Digital attenuator, soft mute and related functions
are also incorporated. It operates from a 2.4 to 5.5
V wide supply voltage range.
Features
- 2-channel processing
- Serial data input
â
2s complement, 16-bit/MSB first, right-justified
format
â
Wide capture function
(up to 3 Ã speed input rate)
- System clock input
â
384fs (16.9344 MHz)
- Shock-proof memory controller
â
ADPCM compression method
â
4-level compression mode selectable
4-bit compression mode 2.78 s/Mbit
5-bit compression mode 2.22 s/Mbit
6-bit compression mode 1.85 s/Mbit
Full-bit non compression mode 0.74 s/Mbit
â
4 external DRAM configurations selectable
1 Ã 16M DRAM (4M Ã 4 bits, refresh cycle =
2048 cycle)
1 Ã or 2 Ã 4M DRAM (1M Ã 4 bits)
1 à 1M DRAM (256k à 4 bits)
â
DRAM at 5V operation is usable for Low-volt-
age operation
- Compression mode selectable
- Microcontroller interface
â
Serial command write and status read-out
â
Data residual detector:
15-bit operation, 16-bit output
â
Digital attenuator
8-bit setting
â
Soft attenuator function
Noiseless attenuation-level switching
(256- step switching in 23 ms max.)
â
Soft mute function
Mute ON in 23 ms max.
Direct return after soft mute release
â
Forced mute
- Extension I/O
Microcontroller interface for external control
using 5 extension I/O pins
- +2.4 to +5.5 V wide operating voltage range
- Schmitt inputs
All input pins (including I/O pins) except CLK
(system clock)
- Reset signal noise elimination
Approximately 3.8 µs or longer (65 system
clock pulses) continuous LOW-level reset
- Digital audio interface (DIT)
- 44-pin QFP package (0.8 mm pin pitch)
Ordering Information
SM5902AF 44pin QFP
NIPPON PRECISION CIRCUITS-1
|
▷ |