MRF186 Datasheet, PDF (8/8 Pages) Motorola, Inc – The RF MOSFET Line RF POWER FIELD-EFFECT TRANSISTOR Channel Enhancement-Mode Lateral MOSFET

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
PACKAGE DIMENSIONS
A
A
G4
L
1
2
4X K
3
4
4X D
bbb M T A M B M
ccc M T A M B M
N
E
(LID)
PIN 5
M
(INSULATOR)
bbb M T A M B M
2X Q
bbb M T A M B M
B
B (FLANGE)
5
C
T
SEATING
PLANE
ccc M T A M B M
R
(LID)
F
H
S
(INSULATOR)
bbb M T A M B M
CASE 375B–04
ISSUE E
NI–860
NOTES:
1. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M-1994.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION H IS MEASURED 0.030 (0.762) AWAY
FROM PACKAGE BODY.
4. RECOMMENDED BOLT CENTER DIMENSION OF
1.140 (28.96) BASED ON M3 SCREW.
INCHES
DIM MIN MAX
A 1.335 1.345
B 0.380 0.390
C 0.180 0.224
D 0.325 0.335
E 0.060 0.070
F 0.004 0.006
G 1.100 BSC
H 0.097 0.107
K 0.085 0.115
L
0.425 BSC
M 0.852 0.868
N 0.851 0.869
Q 0.118 0.138
R 0.395 0.405
S 0.394 0.406
bbb 0.010 REF
ccc 0.015 REF
MILLIMETERS
MIN MAX
33.91 34.16
9.65 9.91
4.57 5.69
8.26 8.51
1.52 1.78
0.10 0.15
27.94 BSC
2.46 2.72
2.16 2.92
10.80 BSC
21.64 22.05
21.62 22.07
3.00 3.51
10.03 10.29
10.01 10.31
0.25 REF
0.38 REF
STYLE 1:
PIN 1. DRAIN
2. DRAIN
3. GATE
4. GATE
5. SOURCE
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation, or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by
customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other
application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola
products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and
distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal
injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture
of the part. Motorola and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their
respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
E Motorola, Inc. 2002.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447
JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3–20–1, Minami–Azabu. Minato–ku, Tokyo 106–8573 Japan. 81–3–3440–3569
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T. Hong Kong. 852–26668334
Technical Information Center: 1–800–521–6274
HOME PAGE: http://www.motorola.com/semiconductors/
MRF186
8
◊
MOTOROLA RF DEVICE DATA
MRF186/D
Archived 2005